Sorry, I've never used a UGPS, so I am not familiar with the details.
You should be able to find out by just plugging a UGPS into a vanilla
SM. I don't seem to recall any power supplied to the timing port?
bp
<part15sbs{at}gmail{dot}com>
On 6/4/2015 11:59 AM, George Skorup wrote:
I know, but the UGPS is powered from the timing port from a 450 AP. Or
you can run it on its own dedicated power supply. What I don't know is
if the current SM hardware's timing port supports UGPS powering. I'm
remembering no for some reason, which is yet another reason why we
said screw the PTP450 and put up ePMP instead.
On 6/4/2015 1:46 PM, Bill Prince wrote:
PTP450 only supports timing via the timing port. What we've done with
them is a dedicated SyncPipe Parasitic.
bp
<part15sbs{at}gmail{dot}com>
On 6/4/2015 11:37 AM, George Skorup wrote:
The PTP450 is just an SM. Does it even support powering the UGPS? I
don't know, I don't have any PTP450s.
On 6/4/2015 10:55 AM, Matt wrote:
Right now for PTP450 we are using parasitic syncpipe. Creates more
connections to fail though. I would really like just the RJ11 plug
from syncpipe to radio. Maybe he could even down size the pipe
itself.
On Wed, Jun 3, 2015 at 6:30 PM, George Skorup <geo...@cbcast.com>
wrote:
I asked Forrest about a UGPS-like pipe. If it's going to cost as
much as a
UGPS because of the power circuit, then forget it, just buy a UGPS.
I would much rather have a parasitic sync-over-power pipe right
now for
those ePMP micro sites and 110PTP backhauls. PoE/ethernet in,
PoE/ethernet/sync out to the radio. On-board GPS and GPS pucks suck.
On 6/3/2015 5:51 PM, Matt wrote:
How about a sync pipe that uses UGPS Power so it only needs to plug
into the timing port?
Get answers to your questions on Synchronization from expert
Forrest
Christian. Post your questions and comments now, and Forrest and
the
Cambium
team will answer them, or join us live today between 1 – 3 PM CDT
http://bit.ly/1cSs42U
Join the Conversation
Cambium Networks Community Forum
