Oh Ken... you think this is so easy. :) From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof Sent: Wednesday, July 15, 2015 8:43 PM To: af@afmug.com Subject: Re: [AFMUG] pmp100 pmp450 sync calculator issues
Why was someone even in there changing code? And whatever happened to automated regression testing? From: George Skorup<mailto:geo...@cbcast.com> Sent: Wednesday, July 15, 2015 8:21 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] pmp100 pmp450 sync calculator issues I updated a 900 AP. Looking at /engineering.cgi on this 13.4 AP and a 13.1.3 AP, the current frame configuration matches. The frame calculator is definitely broken. I see what the difference is now. The new calculator shows max range air delay as one-way, while the previous calculator shows round-trip air delay. Somebody forgot to do math somewhere. So the new calculator needs one-way air delay added to the AP's Rx Start value. Not the end of the world, but yes, confusing. On 7/15/2015 5:04 PM, George Skorup wrote: My guess is it's just the calculator page code that got mucked up, not the actual running RF operation/framing. Go to one AP that is on 13.1.3 and another that's on 13.4. Log in and change the URL to /engineering.cgi and look at the "Current Frame Configuration" on both radios. They should match. If they don't then... uh oh. I don't have enough stuff updated yet to do this myself. On 7/15/2015 3:47 PM, Craig Schmaderer wrote: This case has now been sent up to upper level engineers.� I guess this might be a huge bug, no one can still tell me what calculator is the correct value or if the new software is even running the right time when you upgrade.� I would be careful upgrading radios if you need to time your 100 and 450 together until this gets resolved.�� � Craig R. Schmaderer CEO | Skywave Wireless, Inc. Ph: 402-372-1975 | Fax: 402-372-1058 Direct: 402-372-1052 � From: Af [mailto:af-boun...@afmug.com] On Behalf Of George Skorup Sent: Thursday, July 09, 2015 6:13 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] pmp100 pmp450 sync calculator issues � WTF. So is it the new one or the old one that's wrong? I just ran your dimensions on a 450 AP running 13.2.1. I got the same as your FSK on 13.1.3. Apparently something changed after 13.2/.1. On 7/9/2015 2:34 PM, Craig Schmaderer wrote: So I have a ticket open with cambium on this issue.� Have you guys noticed the fsk calculator on pmp100 radios with software 13.1.3 and lower give you different results than the fsk calculator on a 450 radio running 13.3? I can�t believe cambium never caught this but the tech acts like wow, that�s weird?�� Really?�� So I am trying to figure out if it is an error, or if it matters the software version, that said if people start upgrading to 13.4 on 100 your calculators will change, at least with my settings, so be careful to check your settings again after the upgrade.� I will post my findings with support.� Here is a screen shot of the same radio with 13.1.3 and than with 13.4, you will notice that the difference in software changes the ap start receive time by more than 600.� I would assume that you really don�t want to be off that much.� Any insight on this would be great! � [X] � � [X] � Craig R. Schmaderer CEO | Skywave Wireless, Inc. Ph: 402-372-1975 | Fax: 402-372-1058 Direct: 402-372-1052 � �