The distance between the U bolts on the 5ghz 13dbi is 2 7/8" center to center, and the base is 4" tall overall. the 2.4ghz 13dbi is 3 5/8" between the U bolts and the base is 5".
On Sun, Jul 19, 2015 at 12:58 AM, Glen Waldrop <gwl...@cngwireless.net> wrote: > I'd appreciate it. > > I thought about this list reporting the 5GHz having a weak pattern. Too > late now. > > 5GHz is very low usage here though. I had 6dBi on the tower before. I > pretty much only use 5GHz for those that can actually see the tower. I > probably could have done just as well with the 10dBi version. > > > > ----- Original Message ----- > *From:* Mathew Howard <mhoward...@gmail.com> > *To:* af <af@afmug.com> > *Sent:* Saturday, July 18, 2015 5:15 PM > *Subject:* Re: [AFMUG] ARC DP Omni mounting dimensions > > From memory, I'd guess it's about 3.5-4 inches... I could measure one > Monday. > > I'd really suggest staying away from the Arc 5ghz dual polarity omnis - > they have horrible patterns. The 2.4ghz version is fine though. > > On Sat, Jul 18, 2015 at 10:24 AM, Glen Waldrop <gwl...@cngwireless.net> > wrote: > >> I'm replacing old single polarity equipment with dual polarity. >> >> I ordered ARC 5GHz 13dBi dual polarity omni and 2.4GHz 13dBi dual >> polarity omni. >> >> In the datasheet it says it will work from .75 inch to 3 inch pipe. It >> doesn't have a measurement from top U bolt to bottom U bolt. >> >> Anyone have those measurements? I'm pretty sure that I'm going to have to >> modify the bracket in use or build another. >> > >