We currently have an RMA ticket open regarding this. The note from our
guys about it was, " The unit I am looking at says 'ADI Communication
failure' at the top of the status page. After factory resetting and
configuring the unit, that error message is still there."
So not familiar, but Cambium had no problem letting us RMA the unit.
On 7/20/2015 11:05 AM, Ken Hohhof wrote:
Anyone familiar with this log entry? I'm assuming I have an SM with a
hardware problem? We had heat advisory Saturday but mostly due to high
humidity, I don't think the actual temperature got above 90.
******System Startup******
System Reset Exception -- Watchdog Reset Cur ExtInt 0 Max ExtInt 0 Cur
DecInt 0 Max DecInt 0 Cur Sync 0 Max Sync 0 Cur LED 1 Max LED 1 Cur
WDOG 0
Max WDOG 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 0 Max FEC 0 Cur FPGA 0 Max
FPGA 0 Cur FrmLoc 0 Max FrmLoc 0 Cur WatchDog 33 Max WatchDog 33
RTMLogStats
0 AAState 0
Software Version : CANOPY 13.2 SM-DES
Board Type : P11
Device Setting : 5.4/5.7GHz MIMO OFDM - Subscriber Module -
0a-00-3e-b2-03-92
FPGA Version : 081514
FPGA Features : DES, Sched;
07/20/2015 : 15:09:03 UTC : :ADI communication failure
07/20/2015 : 15:09:03 UTC : :InitADI936x() : Catalina register
failures, ADI
forced reset has been invoked!
07/20/2015 : 15:10:03 UTC : :Forced reset;
07/20/2015 : 15:10:03 UTC :
******System Startup******
System Reset Exception -- Watchdog Reset Cur ExtInt 0 Max ExtInt 0 Cur
DecInt 0 Max DecInt 0 Cur Sync 0 Max Sync 0 Cur LED 1 Max LED 1 Cur
WDOG 0
Max WDOG 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 0 Max FEC 0 Cur FPGA 0 Max
FPGA 0 Cur FrmLoc 0 Max FrmLoc 0 Cur WatchDog 33 Max WatchDog 33
RTMLogStats
0 AAState 0
Software Version : CANOPY 13.2 SM-DES
Board Type : P11
Device Setting : 5.4/5.7GHz MIMO OFDM - Subscriber Module -
0a-00-3e-b2-03-92
FPGA Version : 081514
FPGA Features : DES, Sched;
07/20/2015 : 15:13:43 UTC : :Time Set
