I've used a bunch of these:
http://www.rackmount.com/PCW2014/Accessories/DIN-RAIL/RCB1112BK/RCB1112BK12-50.html
And a couple of these:
http://www.rackmount.com/PCW2014/Accessories/DIN-RAIL/RCB1122BK/RCB1122BK15.html
No, they're not cheap, but are so much easier to keep things clean. I
just modify the wire duct and rail lengths or positions as needed.
For outdoor non-rack cabinets, I mount rail on a wood backplane and do a
vertical 2-3U wall-mount rack for a router or switch if needed. Most of
the used Hoffman enclosures we've bought are 8 or 12" deep and that's
just not enough depth for horizontal rack mounting.
On 10/20/2015 12:13 AM, That One Guy /sarcasm wrote:
http://www.newegg.com/Product/Product.aspx?Item=N82E16816129064&Tpk=N82E16816129064
This is a slick little item, a little pricey for just a din rail. Ive
been looking for something to offset DIN products, like packetflux
gear in our bigger enclosures where we have 18 inch deep racks, we can
put the DIN on the front because the gear would hit the door, and
putting it clear at the back of the enclosure would make it a bitch to
get to.
Any body know of an offset I'm the 20-30 dollar price range? I'm
considering just cutting sections of rack and fastening it to the back
of the front rack to get a backward offset.
Another thing I'm looking for is 2-4u adjustable depth wall mount
racks for our Hoffman enclosures that are 36x36x11. I have been
cutting racks into 4u lengths and using the 10 billion tranzeo L
brackets to set them out 6 inches, but it takes about 2 hours per rack
assembly and looks like shit. plus the depth doesn't allow for the
mikrotik to be rackmounted, I have shallow 10 inch shelves that I can
set them on, but it makes the enclosure still sloppy
I found one 6-12 inch 2u adjustable, but it was something like 200
bucks, I cant justify 400 bucks for 4u.
any ideas?
--
If you only see yourself as part of the team but you don't see your
team as part of yourself you have already failed as part of the team.
