Would help out a lot if you guys would give your SNMP/MIB input on the beta forums I've been trying to do what I can but sometimes it feels like just me on there talking about the MIB that's why it might be missing some stuff you want they have been very good about adding things you just need to tell them what's missing in the beta forum
And now that the 1 MIB is for all UBNT radios you will be helping everyone out — Sent from Mailbox On Wed, Nov 4, 2015 at 2:26 PM, Steve Utick <sut...@gmail.com> wrote: > Here is a Cacti Host Template that I built. Works on AirFiber 5X and > AirFiber 24, and should work on any other AirFiber Platform, as it appears > they all use the same MIB. > On Wed, Nov 4, 2015 at 12:20 PM, Eric Kuhnke <eric.kuh...@gmail.com> wrote: >> I will try to remember to post a cacti host template here when I have one >> built for the AF5X, to save others the work of reinventing the wheel... >> >> On Wed, Nov 4, 2015 at 11:14 AM, Jeremy <jeremysmi...@gmail.com> wrote: >> >>> I am pulling and graphing most of the pertinent stuff and haven't had any >>> issues. It is a huge step up from where they were. >>> >>> On Wed, Nov 4, 2015 at 12:11 PM, Eric Kuhnke <eric.kuh...@gmail.com> >>> wrote: >>> >>>> wow, scrolling through that, it is significantly more detailed than the >>>> last ubnt MIB I saw. They must've put quite a lot of person-hours into it. >>>> >>>> On Wed, Nov 4, 2015 at 11:10 AM, Jeremy <jeremysmi...@gmail.com> wrote: >>>> >>>>> Works perfectly >>>>> http://dl.ubnt.com/firmwares/airfiber5X/v3.0.2.1/UBNT-MIB.txt >>>>> >>>>> On Wed, Nov 4, 2015 at 11:44 AM, Eric Kuhnke <eric.kuh...@gmail.com> >>>>> wrote: >>>>> >>>>>> ubnt guys, what's the state of SNMP on these? If any serious progress >>>>>> has been made in the last 3-4 months, can you paste a numeric snmpwalk of >>>>>> an operational unit? >>>>>> >>>>>> second question: If SNMP is still broken, does CPU usage of the http >>>>>> management interface have any effect on traffic flow whatsoever? I'm >>>>>> thinking of a short shell script with curl to login to the https front >>>>>> page >>>>>> of the radio and grab key parameters like RSL on both chains. Every 60 >>>>>> seconds. >>>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >>
