I can't decide that for you. You really need to know what the noise is
like at each sector. However, when I use 10 MHz channels, I try to take
advantage of the fact that you're only using a 1/2 channel. You're goig
to get better results (most of the time) when you're at the edges.
bp
<part15sbs{at}gmail{dot}com>
On 11/14/2015 1:52 PM, Tim Reichhart wrote:
Bill
my other sectors at the same tower is on 6,9 should I go with 1 and 11
with 10mhz?
Tim
------------------------------------------------------------------------
-----Original Message-----
From: "Bill Prince" <part15...@gmail.com>
To: af@afmug.com
Date: 11/14/15 04:41 PM
Subject: Re: [AFMUG] link problems
Get it off channel 7. Poke around at the sub end and see what else
is on what channel. Typically, there will be less noise at channel
1 or 11. Most SOHO routers are going to be on channel 6, and
putting your stuff on 7 will get local interference most of the time.
bp
<part15sbs{at}gmail{dot}com>
On 11/14/2015 1:34 PM, Tim Reichhart wrote:
Josh
these stats are at the CPE and I even have the rf shields on the
AP's and the ap's are up 150ft up the air. So it sounds like I am
going have to probably switch it to 5ghz.
Tim
------------------------------------------------------------------------
-----Original Message-----
From: "Josh Luthman" <j...@imaginenetworksllc.com>
To: af@afmug.com
Date: 11/14/15 04:28 PM
Subject: Re: [AFMUG] link problems
Looks like noise at the AP being my first thought. Assuming
those stats are from the CPE.
Josh Luthman
Office: 937-552-2340937-552-2340
Direct: 937-552-2343937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Nov 14, 2015 4:27 PM, "Tim Reichhart"
<timreichh...@hometowncable.net
<mailto:timreichh...@hometowncable.net>> wrote:
The customer is wanting 8 meg but is only getting 3-4 meg
there josh
------------------------------------------------------------------------
-----Original Message-----
From: "Josh Luthman" <j...@imaginenetworksllc.com
<mailto:j...@imaginenetworksllc.com>>
To: af@afmug.com <mailto:af@afmug.com>
Date: 11/14/15 04:25 PM
Subject: Re: [AFMUG] link problems
What's the problem..?
Josh Luthman
Office: 937-552-2340
<http://tel:937-552-2340>937-552-2340
<http://tel:937-552-2340>
Direct: 937-552-2343
<http://tel:937-552-2343>937-552-2343
<http://tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Nov 14, 2015 4:20 PM, "Tim Reichhart"
<timreichh...@hometowncable.net
<mailto:timreichh...@hometowncable.net>> wrote:
Hello Guys
I just installed an powerbeam m2 today at
customers house and I am getting:
signal strength -61 dBm
noise floor -89 dBm
transmit CCQ 86.4%
tx/rx rate is around 10-39mpbs/58.5-65mbps
Channel width 10MHz
Channel/Frequency 7/2442MHz
Version v5.6.2 (XW)
from the tower to CPE is around 3.5miles
Call
Send SMS
Call from mobile
Add to Skype
You'll need Skype CreditFree via Skype
Call
Send SMS
Call from mobile
Add to Skype
You'll need Skype CreditFree via Skype
