How soon will we be asking if our 450i SMs work with the new 460 APs?
More QAMs! More frequencies! Fiber+DC! Active antennas! Pull more
rabbits out of the hat!
-----Original Message-----
From: Chuck McCown
Sent: Saturday, November 28, 2015 10:36 AM
To: af@afmug.com
Subject: Re: [AFMUG] Canopy 14.1.1 Release and PTP
Just trolling... ;-)
-----Original Message-----
From: Sriram Chaturvedi
Sent: Saturday, November 28, 2015 9:35 AM
To: af@afmug.com
Subject: Re: [AFMUG] Canopy 14.1.1 Release and PTP
Hi Chuck, I was directly responding to Mark�s question on 430
�upgrade�
project where I assumed he was eventually going to upgrade his 430 SMs to
450/450i. Perhaps it was an incorrect assumption. Believe it or not, my
responses aren�t loaded when I post here.
On Nov 28, 2015, at 10:28 AM, Chuck McCown <ch...@wbmfg.com> wrote:
"right away" sounds ominous
-----Original Message----- From: Sriram Chaturvedi
Sent: Saturday, November 28, 2015 8:00 AM
To: af@afmug.com
Subject: Re: [AFMUG] Canopy 14.1.1 Release and PTP
450i AP will interop with 430 SMs. You don't need to swap the SMs out
right away.
Thanks,
Sriram
________________________________________
From: Af <af-boun...@afmug.com> on behalf of Mark Radabaugh
<m...@amplex.net>
Sent: Saturday, November 28, 2015 8:24 AM
To: af@afmug.com
Subject: Re: [AFMUG] Canopy 14.1.1 Release and PTP
How about 450i AP to 430 SM? I would like to start deploying 450i
instead of 450 for 430 upgrade projects. Do I have to get all of the 430
SM�s swapped first?
Mark
On Nov 27, 2015, at 11:21 AM, Aaron Schneider
<aaron.schnei...@cambiumnetworks.com> wrote:
It should work, but at the moment I can�t recall if/when we tried this
with PTP mode. I�ll let you know.
450i - 450 isn�t really an �interop� situation like 430 - 450 was.
430 - 450 was quite a bit different, needing SISO to talk to MIMO with
the way we did MIMO at first (MIMO-B using both channels for data).
450i - 450 is much more similar, and we have been using that combination
internally for a long time. It wasn�t part of the initial release of
450i due to needing to focus on the HW release itself.
I�ll be in touch on the PTP question. It is important to allow you to
upgrade a PTP link one end at a time.
Regards,
-Aaron
On 11/27/15, 12:09 AM, "Af on behalf of George Skorup"
<af-boun...@afmug.com on behalf of geo...@cbcast.com> wrote:
I thought interop was only for PMP?
On 11/26/2015 11:38 PM, Matt wrote:
Is it possible for a PTP450i master to talk to a PTP450 slave now?