I have no doubt the gui performance will eventually improve, but I also have no doubt by old lady will eventually quit being a bitch. It does not change the fact I would some days really love to be able to just punch both in the face.
Note, I would never punch the old lady in the face On Fri, Dec 4, 2015 at 1:06 PM, Josh Luthman <j...@imaginenetworksllc.com> wrote: > Sorry but your 450 radios cost way too much to do 5.1. ePMP does the > entire band and the CPEs aren't $600. And as we found out yesterday the > POEs aren't $100. I can install 5 people with the same hardware costs that > a single 450 would cost me. 5x revenue and growth for me and my customers. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Dec 4, 2015 at 1:42 PM, Matt Mangriotis < > matt.mangrio...@cambiumnetworks.com> wrote: > >> Sri’s message must have been cut off… the rest of it said, “…and in the >> meantime, please buy more PMP 450!” >> >> >> >> Matt >> >> >> >> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Sriram Chaturvedi >> *Sent:* Friday, December 04, 2015 12:36 PM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] Force 110 >> >> >> >> Hi Steve, >> >> >> >> We have been prioritizing radio performance over the GUI for a very long >> time. But, like Josh indicated, we made some incremental improvements in >> GUI performance in 2.4 and 2.5 releases but we are fully aware its not >> enough. The team has been working on a wholesale rework of the GUI engine >> (not as much as the look and feel) and we hope to have significant GUI >> performance gains in a Q1 release. We want to make sure it works on a PC, >> netbook, mobile etc. with all kinds of processor and memory configurations. >> We have been receiving tremendous feedback on use cases and performance >> pains seen my many folks on here and we’re taking all this input and >> working through them carefully. So keep the feedback (as negative as they >> can be) coming, on the GUI performance. >> >> >> >> All I can ask at this time is your patience and support. >> >> >> >> Thanks, >> >> Sriram >> >> >> >> Join the Conversation >> Cambium Networks Community Forum <http://community.cambiumnetworks.com> >> >> >> >> >> >> >> >> On Dec 4, 2015, at 12:25 PM, Josh Luthman <j...@imaginenetworksllc.com> >> wrote: >> >> >> >> It does seem slightly better in 2.5.1 than what it did in 2.3, but there >> is a good bit of room for speed improvements. >> >> >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> On Fri, Dec 4, 2015 at 1:22 PM, George Skorup <geo...@cbcast.com> wrote: >> >> I can deal with the GUI being stupid and slow because the performance is >> better than UBNT >> >> On 12/4/2015 12:11 PM, That One Guy /sarcasm wrote: >> >> the biggest complaint i have is that rather than just loading the >> components on the page you are on, it loads the entire webserver and only >> displays the components of that page, very inefficient >> >> >> >> Im lazy too, I like a site survey option, it makes life easier for techs >> to not have to know every possible essid >> >> >> >> fsk and 450 make me happy >> >> >> >> >> >> >> >> On Fri, Dec 4, 2015 at 12:07 PM, Josh Baird <joshba...@gmail.com> wrote: >> >> What are your problems? >> >> >> >> On Fri, Dec 4, 2015 at 1:06 PM, Adam Moffett <dmmoff...@gmail.com> wrote: >> >> I wish a GUI glitch was the worst of my problems. >> >> On 12/4/2015 12:57 PM, That One Guy /sarcasm wrote: >> >> The more We are using EPMP the more i wish the radios had a face so i >> could punch it in the face >> >> >> >> On Thu, Dec 3, 2015 at 7:35 PM, George Skorup <geo...@cbcast.com> wrote: >> >> Yes. You cannot have single quotes in the device name. I tried that once >> and the radio acted really stupid. None of the config would display. For >> example, I changed it from "Bob's House" to "Bobs House" and it was sane >> again. >> >> Almost the same thing on Canopy, just a little bit smarter about it. It >> won't even let you put a ' in the SNMP site name field. It just reverts >> back to the No Site Name default. >> >> On 12/3/2015 7:29 PM, Mike Hammett wrote: >> >> I think it was related to a single quote ' in some of the fields of the >> config. I dumped the config, edited them out and now it seems to be fine. >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> <https://www.facebook.com/ICSIL> >> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >> <https://www.linkedin.com/company/intelligent-computing-solutions> >> <https://twitter.com/ICSIL> >> >> Midwest Internet Exchange >> http://www.midwest-ix.com >> >> <https://www.facebook.com/mdwestix> >> <https://www.linkedin.com/company/midwest-internet-exchange> >> <https://twitter.com/mdwestix> >> ------------------------------ >> >> *From: *"Josh Luthman" <j...@imaginenetworksllc.com> >> <j...@imaginenetworksllc.com> >> *To: *af@afmug.com >> *Sent: *Thursday, December 3, 2015 6:44:54 PM >> *Subject: *Re: [AFMUG] Force 110 >> >> Never had a problem, but keep in mind I use one PC to update from shipped >> firmware to latest and then slap on a template. >> >> >> >> Then I use the laptop in the truck to do everything else on site. >> >> >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> >> >> On Thu, Dec 3, 2015 at 7:33 PM, Mathew Howard <mhoward...@gmail.com> >> wrote: >> >> I saw something like that happen, but it went back to normal after I >> reloaded the interface... or maybe I had to reboot it, I don't remember for >> sure. >> >> >> >> On Thu, Dec 3, 2015 at 6:31 PM, Mike Hammett <af...@ics-il.net> wrote: >> >> Have any of you seen where most of a Force 110's setting fields are blank >> when you login and when you go to save it after entering everything, it >> wants to reboot to the 192.168.0.2 address? That's clearly not what I have >> entered, but that's what it wants to use. >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions >> http://www.ics-il.com >> >> <https://www.facebook.com/ICSIL> >> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >> <https://www.linkedin.com/company/intelligent-computing-solutions> >> <https://twitter.com/ICSIL> >> >> Midwest Internet Exchange >> http://www.midwest-ix.com >> >> <https://www.facebook.com/mdwestix> >> <https://www.linkedin.com/company/midwest-internet-exchange> >> <https://twitter.com/mdwestix> >> >> >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> If you only see yourself as part of the team but you don't see your team >> as part of yourself you have already failed as part of the team. >> >> >> >> >> >> >> >> >> >> -- >> >> If you only see yourself as part of the team but you don't see your team >> as part of yourself you have already failed as part of the team. >> >> >> >> >> >> >> > > -- If you only see yourself as part of the team but you don't see your team as part of yourself you have already failed as part of the team.