Last question then. Is it worth it to upgrade the SM's to 14.1.1 or just leave them at 13.4 and call it good? I intend to swap the 430 AP's with 450's and migrate the 430 SM's off the AP sooner than later. (I read your previous post about upgrading the SM's though a 450 AP.) Also, I am adding a 450i AP next week and would like the SM's to have a secondary or even tertiary color code in case the 450 AP fails. Would they (430 SM's) work in 13.4 to the 450i?
On Tue, Dec 8, 2015 at 12:42 PM, Matt Mangriotis < matt.mangrio...@cambiumnetworks.com> wrote: > Only when the PMP 430 SM is registered to a PMP 450 AP (i.e. > Interoperability Mode) will this work… > > > > R14.1.1 technically is not supported by PMP 430 in standalone mode. > However, because we know there are still networks that have PMP 430 SMs > interoperating (with 450), we made this function properly. > > > > You are correct, using a 430 AP will not push this release to any devices. > > > > Matt > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Sam Lambie > *Sent:* Tuesday, December 08, 2015 1:23 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Enabling Auto Update with 14.1.1 on 430 SM's > > > > That s the thing, I don't want to upgrade the AP to 14.1.1 just the SM's, > Auto update in CNUT version 4.9.x doesn't like to push the file through the > AP. > > > > On Tue, Dec 8, 2015 at 12:12 PM, Matt Mangriotis < > matt.mangrio...@cambiumnetworks.com> wrote: > > It means that the 430 SM is supported when they’re talking to a 450 AP > (Interoperability Mode only). > > > > The PMP 430 AP will not take R14.1.1. > > > > Matt > > > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Sam Lambie > *Sent:* Tuesday, December 08, 2015 1:06 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Enabling Auto Update with 14.1.1 on 430 SM's > > > > Thanks Matt. So what does this mean then? > Customers running PMP 430 SMs in PMP 450 interoperability mode, please use > the PMP 450 CNUT pkg3 file found here > <https://support.cambiumnetworks.com/files/pmp450/>. Note the linked file > is for 14.1.1 > > > > On Tue, Dec 8, 2015 at 11:57 AM, Matt Mangriotis < > matt.mangrio...@cambiumnetworks.com> wrote: > > Sam – R14.1.1 is not supported by PMP 430. > > > > The PMP 430 SM are only supported when connected to PMP 450 AP (i.e. > Interoperability mode). Also, make sure you’re using the latest CNUT > (available on the support site). > > > > Matt > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Sam Lambie > *Sent:* Tuesday, December 08, 2015 12:20 PM > *To:* af@afmug.com > *Subject:* [AFMUG] Enabling Auto Update with 14.1.1 on 430 SM's > > > > Hey all, > > I want to update my 430 SM's from a 430 AP to 14.1.1 via the Autoupdate > function in CNUT. However, I get an error No update package available. > > Is there a work around without updating the AP to 14.1.1 1st? Or do I have > to scan for all the SM's manually and upgrade them that way? > > Sam > > > > -- > > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > > > > > -- > > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > > > > > -- > > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>