Sorry Vlad, no, this won’t happen. The interoperability mode was intended as a migratory path to move the network to PMP 450 (i.e. buy some time). The PMP 430 FPGA is simply too full to include additional code to support 5ms frames.
Matt From: Af [mailto:af-boun...@afmug.com] On Behalf Of Vlad Sedov Sent: Tuesday, December 08, 2015 1:56 PM To: af@afmug.com Subject: Re: [AFMUG] Enabling Auto Update with 14.1.1 on 430 SM's Speaking of interop mode.. Are there any plans to add 5ms frame option to 430 SM's attached to a 450 AP? Thanks, Vlad On 12/8/2015 1:42 PM, Matt Mangriotis wrote: Only when the PMP 430 SM is registered to a PMP 450 AP (i.e. Interoperability Mode) will this work… R14.1.1 technically is not supported by PMP 430 in standalone mode. However, because we know there are still networks that have PMP 430 SMs interoperating (with 450), we made this function properly. You are correct, using a 430 AP will not push this release to any devices. Matt From: Af [mailto:af-boun...@afmug.com] On Behalf Of Sam Lambie Sent: Tuesday, December 08, 2015 1:23 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] Enabling Auto Update with 14.1.1 on 430 SM's That s the thing, I don't want to upgrade the AP to 14.1.1 just the SM's, Auto update in CNUT version 4.9.x doesn't like to push the file through the AP. On Tue, Dec 8, 2015 at 12:12 PM, Matt Mangriotis <matt.mangrio...@cambiumnetworks.com<mailto:matt.mangrio...@cambiumnetworks.com>> wrote: It means that the 430 SM is supported when they’re talking to a 450 AP (Interoperability Mode only). The PMP 430 AP will not take R14.1.1. Matt From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of Sam Lambie Sent: Tuesday, December 08, 2015 1:06 PM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] Enabling Auto Update with 14.1.1 on 430 SM's Thanks Matt. So what does this mean then? Customers running PMP 430 SMs in PMP 450 interoperability mode, please use the PMP 450 CNUT pkg3 file found here<https://support.cambiumnetworks.com/files/pmp450/>. Note the linked file is for 14.1.1 On Tue, Dec 8, 2015 at 11:57 AM, Matt Mangriotis <matt.mangrio...@cambiumnetworks.com<mailto:matt.mangrio...@cambiumnetworks.com>> wrote: Sam – R14.1.1 is not supported by PMP 430. The PMP 430 SM are only supported when connected to PMP 450 AP (i.e. Interoperability mode). Also, make sure you’re using the latest CNUT (available on the support site). Matt From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of Sam Lambie Sent: Tuesday, December 08, 2015 12:20 PM To: af@afmug.com<mailto:af@afmug.com> Subject: [AFMUG] Enabling Auto Update with 14.1.1 on 430 SM's Hey all, I want to update my 430 SM's from a 430 AP to 14.1.1 via the Autoupdate function in CNUT. However, I get an error No update package available. Is there a work around without updating the AP to 14.1.1 1st? Or do I have to scan for all the SM's manually and upgrade them that way? Sam -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598<tel:575-758-7598> Office www.Taosnet.com<http://www.Taosnet.com> -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598<tel:575-758-7598> Office www.Taosnet.com<http://www.newmex.com> -- -- Sam Lambie Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com<http://www.newmex.com>