32 bit BGP AS works fine between Mikrotik and Brocade MLXe. They have a config issue. Have them send you running-config pertaining to your session. Also post your config.
Erich Kaiser North Central Tower er...@northcentraltower.com Office: 630-621-4804 Cell: 630-777-9291 On Sun, Jan 17, 2016 at 3:12 PM, Faisal Imtiaz <fai...@snappytelecom.net> wrote: > post your bgp config pls. > > Also, why are they using next hop self = yes. > > and based on what you posted on the MT Forum (it is not the config, more > of a status ..) would indicate that Their side is complaining about your > ASN. > > :) > > > > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > Miami, FL 33155 > Tel: 305 663 5518 x 232 > > Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net > > ------------------------------ > > *From: *"Sterling Jacobson" <sterl...@avative.net> > *To: *af@afmug.com > *Sent: *Sunday, January 17, 2016 3:53:00 PM > *Subject: *Re: [AFMUG] BGP 32 Bit RouterOS AS Accept? > > This is what I see. > > > > I posted their config in this mikrotik post here: > > > > http://forum.mikrotik.com/viewtopic.php?f=14&t=103924 > > > > I appreciate your help. > > > > It’s got to be something simple on their end or my end. > > > > I have nearly the same config set up on another 1072 to another peer and > it enteres the accept state with the same ASN. > > So I’m still leaning towards it being their Brocade. > > > > > > > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Reynolds > *Sent:* Saturday, January 16, 2016 11:16 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] BGP 32 Bit RouterOS AS Accept? > > > > Enable BGP logging in Mikrotik, this should give you better detail. Make > sure the info you get back in the log is correct (that they have your AS > set right), and double check your config. > > On Jan 16, 2016 7:19 PM, "Sterling Jacobson" <sterl...@avative.net> wrote: > > I'm running one of those new fancy routerboard CCR 1072 routers on > RouterOS 6.33.1. > > If I use my 32 bit BGP AS number the remote says Bad Remote AS. > If I fake one around 65010 then it establishes a connection. > > Is this my problem or theirs? > > They are using Brocade MLXe code 5.8. > > Anyone else established a succesfull BGP with 32 bit AS number on routeros? > > Just want to try and narrow this down before I blame their Brocade for > being complete junk, hahaha! > > >