“Value” or “Events”?
(looking at web GUI)
From: Bill Prince
Sent: Wednesday, January 20, 2016 4:57 PM
To: [email protected]
Subject: Re: [AFMUG] SyncInjector 1PPS Active = 0
That is a counter that increments _when_ the 1pps becomes active.
if it's zero, it's either not ever gone active, or someone's reset the counter.
We have one site where the counter will be static for a week or two, and then
suddenly in the space of a couple minutes, it will increment to 4 or 5. Then
static for another week or two.
Similar with the 2D Fix, 3D Fix, and DGPS Fix. They all increment when they
reach that state.
bp
<part15sbs{at}gmail{dot}com>
On 1/20/2016 1:32 PM, Ken Hohhof wrote:
Does this mean the SyncInjector isn't receiving the 1PPS pulse from the
SyncPipe?� Of that the SyncInjector isn't putting it out to the radios?
If it reports 2D and 3D fix and lots of satellites, which is more likely, a
bad SyncPipe, or a bad SyncInjector?� (a cable/connector issue is another
possibility)
When I go to the site (tomorrow), I will try the Pipe first, since that would
be the least disruptive.
