Yes. My guess is for full throughput I will have to use both. -Ty
-Ty On Thu, Jan 21, 2016 at 11:14 AM, Jon Langeler <jon-ispli...@michwave.net> wrote: > For dual pol? If you can't get it, I can check later on. > > Jon Langeler > Michwave Technologies, Inc. > > On Jan 21, 2016, at 11:57 AM, Ty Featherling <tyfeatherl...@gmail.com> > wrote: > > Ok do I need to connect both radio 1 and radio 2 on each unit? > > -Ty > > > > -Ty > > On Thu, Jan 21, 2016 at 10:25 AM, Jon Langeler <jon-ispli...@michwave.net> > wrote: > >> Correct. Attach the radio interface to eth1. The newer software has a >> wizard I believe. Otherwise call your seller >> >> Jon Langeler >> Michwave Technologies, Inc. >> >> > On Jan 21, 2016, at 11:16 AM, Ty Featherling <tyfeatherl...@gmail.com> >> wrote: >> > >> > I'm installing my first Ceragon links, IP20 series to be exact. I have >> them up and linked and I am stuck on this idea of Services and Service >> Points. Services in this software seem analogous to software bridges. For >> example there is a Management service that you are supposed to add service >> points to for each interface you want to be able to manage the radios from. >> I was able to add Eth1 to that service and then I was able to manage the >> radios from the Eth1 on the POE. >> > >> > Now that they are aligned I tried to traverse the link and was unable >> to. I take it that I need another Service with service points on the radio >> interfaces as well as the Eth1 on each end to make one big bridge but that >> doesn't seem to be working. >> > >> > Does anyone know how this is to be done? >> > >> > >> > -Ty >> > >