I do have a POE switch but the docs list the UVC cameras as 24 volt and not 802.3AF or AT compliant. I know the pro version is 48 volt AF compliant but I didn't order any of those, only the regular UVC version. I hope I didn't screw up. Are most people using the pro version?
On Tue, Mar 1, 2016 at 7:13 AM Josh Baird <joshba...@gmail.com> wrote: > Do you already have a switch? If not, you could use any variety of a PoE > switch. > > On Tue, Mar 1, 2016 at 8:06 AM, Lewis Bergman <lewis.berg...@gmail.com> > wrote: > >> I don't think this is to much of a hijack. I just ordered 13 Ubiquiti >> camera that are of the 24 volt UVC variety. Does anyone know >> Of a midspan deal, either wall or rack mount, that will prevent me from >> having a huge gaggle of individual power inserters for these? >> >> On Tue, Mar 1, 2016, 6:47 AM Josh Baird <joshba...@gmail.com> wrote: >> >>> Um, yeah.. let me get some of these! >>> >>> On Mon, Feb 29, 2016 at 9:45 PM, Forrest Christian (List Account) < >>> li...@packetflux.com> wrote: >>> >>>> The new version J0 syncinjectors which will be available shortly after >>>> wispamerica (and may end up with a slightly different name to reflect their >>>> more 'universal' powering capability) do what you're talking about, other >>>> than the redundant power and hot swappability. >>>> >>>> That is: two power rails, jumper selectable per port as far as which >>>> rail to power from, jumper selectable pair configuration and up to 1A per >>>> port (which means the same device will do canopy, ubnt, mikrotik, airfiber >>>> etc.). >>>> >>>> Assuming we don't end up with an unexpected board spin, I expect 45-60 >>>> days, preorders to begin probably 30 days from now. >>>> >>>> The 12 port din will follow probably around 60 days after that. There >>>> won't be a lot of per-port savings, just a bit of added density (12 ports >>>> in the same space as two 4 port units would occupy if they were mounted >>>> next to each other on a DIN rail). >>>> >>>> There is also a rackmount unit definitely on the roadmap. The delay >>>> right now is finding a enclosure manufacturer, but I am currently following >>>> several leads, as this is one of my top priorities as I fully realize that >>>> that is important to many of my customers. >>>> >>>> In relation to the redundant power: Almost all of the redundantly >>>> powered devices out there simply use two diodes to perform the redundancy >>>> function. None of the circuitry that is actually likely to fail is >>>> actually redundant. If you're simply wanting to make sure that the devices >>>> can be powered from either of two sources, then that can be accomplished >>>> with the two diodes I mentioned above. >>>> >>>> >>>> On Mon, Feb 29, 2016 at 11:13 AM, Peter Kranz <pkr...@unwiredltd.com> >>>> wrote: >>>> >>>>> Curious if anyone has recommendations on a mid-span power injector >>>>> that supports multiple voltages and provides redundant power, ideally >>>>> hot-swappable. I don’t really want a switch like the netonix boxes, I’d >>>>> rather just have a mid-span device. >>>>> >>>>> >>>>> >>>>> >>>>> *Peter Kranz*www.UnwiredLtd.com <http://www.unwiredltd.com/> >>>>> Desk: 510-868-1614 x100 >>>>> Mobile: 510-207-0000 >>>>> pkr...@unwiredltd.com >>>>> >>>>> >>>>> >>>> >>>> >>>> >>>> -- >>>> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.* >>>> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602 >>>> forre...@imach.com | http://www.packetflux.com >>>> <http://www.linkedin.com/in/fwchristian> >>>> <http://facebook.com/packetflux> <http://twitter.com/@packetflux> >>>> >>>> >>> >
