If you are good with an iron, you could remove the regulator chip from an SM
and replace it into the AP (assuming it is the regulator that dies from
overvoltage).
-----Original Message-----
From: Chuck McCown
Sent: Thursday, March 10, 2016 9:05 AM
To: af@afmug.com
Subject: Re: [AFMUG] FSK power problem?
He might could do an advance replacement...
-----Original Message-----
From: Chuck McCown
Sent: Thursday, March 10, 2016 9:04 AM
To: af@afmug.com
Subject: Re: [AFMUG] FSK power problem?
Paul McCall can probably fix those APs.
-----Original Message-----
From: Christopher Tyler
Sent: Thursday, March 10, 2016 9:03 AM
To: af@afmug.com
Subject: Re: [AFMUG] FSK power problem?
Live an learn. At least you'll never do it again (hopefully).
--
Christopher Tyler
MTCRE/MTCNA/MTCTCE/MTCWE
Total Highspeed Internet Services
417.851.1107
----- Original Message -----
From: "Chuck McCown" <ch...@wbmfg.com>
To: af@afmug.com
Sent: Thursday, March 10, 2016 10:02:07 AM
Subject: Re: [AFMUG] FSK power problem?
We all just shed a collective tear...
At least tomorrow is Friday, right?
Spring his here!
Jaime is bound to put some photos of good food on the list.
Plenty of reasons to continue to live Scott.
From: Scott Vander Dussen
Sent: Thursday, March 10, 2016 8:58 AM
To: af@afmug.com
Subject: Re: [AFMUG] FSK power problem?
Oh wow, that’s fairly misleading. So I just smoked a ring of FSK.
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Baird
Sent: Thursday, March 10, 2016 7:56 AM
To: af@afmug.com
Subject: Re: [AFMUG] FSK power problem?
Yeah, the SI's take up to ~60V, but they output what you feed them. If you
feed them 48V, they output 48V. They do not have internal DC/DC converters
unless I completely missed a new product announcement from Forrest (but, I
don't see this product on the website).
On Thu, Mar 10, 2016 at 10:55 AM, Scott Vander Dussen <sc...@velociter.net>
wrote:
Thanks,
`S
---
Sent mobile, typed by thumbs.
On Mar 10, 2016, at 07:53, Josh Baird <joshba...@gmail.com> wrote:
I haven't heard of this magical SyncInjector with a built in DC-DC
converter that you speak of!
On Thu, Mar 10, 2016 at 10:48 AM, Scott Vander Dussen
<sc...@velociter.net> wrote:
Yes, but we're using SyncInjector version IO which allows 24-56VDC
input and regulates that back down to 24VDC for the radios.
-----Original Message-----
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown
Sent: Thursday, March 10, 2016 7:39 AM
To: af@afmug.com
Subject: Re: [AFMUG] FSK power problem?
Dumb question:
You know the FSK have an absolute max input voltage of 30 VDC with the
smoke exit voltage around 36 VDC, right?
-----Original Message-----
From: Scott Vander Dussen
Sent: Thursday, March 10, 2016 8:34 AM
To: af@afmug.com
Subject: [AFMUG] FSK power problem?
We just changed out a 24vdc 20A AC/DC power supply with a 48vdc
rectifier.
This powers 4 Syncinjectors and 2 Netonix. There is a mix of 450 and
FSK APs in each of those Syncinjectors. When we powered back up 6 of the 6
FSK wont establish eth link with the Netonix, all the 450 are fine. Ideas?
Tower climber en route but I'm stumped. TIA
Thanks,
`S
---
Sent mobile, typed by thumbs.
