You can go to 23 Ghz with SMA.
From: Josh Reynolds
Sent: Thursday, March 17, 2016 7:55 AM
To: af@afmug.com
Subject: Re: [AFMUG] UBNT new product
Something about problems with sma connectors over 6ghz I think it was, but I
can't remember for sure.
On Mar 17, 2016 8:52 AM, "Chuck McCown" <ch...@wbmfg.com> wrote:
I am going to have to make the adapter with SMA on it due to physical size.
But SMA to N jumper is not a big deal. I need to see the radio mount thinking
that I can make it latch onto the Remec antenna with the same latches as the
Remec radios. I can do the same for SAF bolt mount too. Probably do DW, Remec
and SAF.
2 units per link would need circulators, can be done. Depends on filters in
the radios. May need to do external filters.
From: Gino Villarini
Sent: Thursday, March 17, 2016 7:48 AM
To: Animal Farm
Subject: Re: [AFMUG] UBNT new product
AF11x , single radio for all band. 1024 qam DuaL Pol. 600 mbps fdx so im
asuming 60 mhz channel size dula pol for complete 600 mbps
I think is a great unit for replacing links you need more BW. Mimosa missed
the boat on this type of application by making a tdd 11 ghz radio.
Chuck, there will be a huge need for N to Remec and SAF adapters.. also some
sort of adapter to put 2 units per link
On Thu, Mar 17, 2016 at 9:43 AM, Josh Reynolds <j...@kyneticwifi.com> wrote:
Yes, AF11
On Mar 17, 2016 8:43 AM, "Brian Sullivan" <installe...@foxvalley.net> wrote:
Is it part of the airFiber line up?
On 3/17/2016 8:40 AM, Chuck McCown wrote:
Part 101 11 GHz radio.� $799/end� Type N connectors.�
1.2 Gbps I think.� Dual pol.� I am thinking of making some adapters
so you can connect these things to DR and Remec antennas.�
