Something about problems with sma connectors over 6ghz I think it was, but I can't remember for sure. On Mar 17, 2016 8:52 AM, "Chuck McCown" <ch...@wbmfg.com> wrote:
> I am going to have to make the adapter with SMA on it due to physical > size. But SMA to N jumper is not a big deal. I need to see the radio > mount thinking that I can make it latch onto the Remec antenna with the > same latches as the Remec radios. I can do the same for SAF bolt mount > too. Probably do DW, Remec and SAF. > > 2 units per link would need circulators, can be done. Depends on filters > in the radios. May need to do external filters. > > *From:* Gino Villarini <ginovi...@gmail.com> > *Sent:* Thursday, March 17, 2016 7:48 AM > *To:* Animal Farm <af@afmug.com> > *Subject:* Re: [AFMUG] UBNT new product > > AF11x , single radio for all band. 1024 qam DuaL Pol. 600 mbps fdx so im > asuming 60 mhz channel size dula pol for complete 600 mbps > > I think is a great unit for replacing links you need more BW. Mimosa > missed the boat on this type of application by making a tdd 11 ghz radio. > > Chuck, there will be a huge need for N to Remec and SAF adapters.. also > some sort of adapter to put 2 units per link > > On Thu, Mar 17, 2016 at 9:43 AM, Josh Reynolds <j...@kyneticwifi.com> > wrote: > >> Yes, AF11 >> On Mar 17, 2016 8:43 AM, "Brian Sullivan" <installe...@foxvalley.net> >> wrote: >> >>> Is it part of the airFiber line up? >>> >>> On 3/17/2016 8:40 AM, Chuck McCown wrote: >>> >>> Part 101 11 GHz radio.� $799/end� Type N connectors.� >>> 1.2 Gbps I think.� Dual pol.� I am thinking of making some adapters >>> so you can connect these things to DR and Remec antennas.� >>> >>> >>> >