We're good. If you need me, you can even just use m...@cambiumnetworks.com
I already traded emails with Steve. Matt -----Original Message----- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof Sent: Thursday, March 24, 2016 10:22 AM To: af@afmug.com Subject: Re: [AFMUG] Cambium Support for LibreNMS Try matt <dot> mangriotis <at> cambiumnetworks.com -----Original Message----- From: Adam Moffett Sent: Thursday, March 24, 2016 10:17 AM To: af@afmug.com Subject: Re: [AFMUG] Cambium Support for LibreNMS There are some Cambium lurkers such as Aaron Schneider and Matt Mangriottis (sp?). Whether they are actively reading your post is hard to say of course. For permission to use their logo, I imagine Matt would be the one to reach out to. Search the archive for his email address? On 3/24/2016 10:55 AM, Steve wrote: > Also there is an discussion going on. > > What would you consider the 3 top things that all wireless devices > (for the most part) share when it comes to the "health" of a wireless device? > > So far IMHO in our industry to start it would be > > 1) Signal, Power level RSSI in some cases - measured in dBm > 2) SNR (Signal to Noise Ratio) > 3) GPS status Sync or no sync .. that is the question. > > > What else would you consider more important that is pretty much global > across all wireless devices? > > > ----- Original Message ----- > From: "Steve" <li...@wavedirect.org> > To: af@afmug.com > Sent: Thursday, March 24, 2016 10:46:48 AM > Subject: Re: [AFMUG] Cambium Support for LibreNMS > > Nope not yet. We are making some minor changes and going back and > forth at the moment before it gets merged. We'll use a temp icon at > first if we have to. > > Any Cambium employees watching? > > > > ----- Original Message ----- > From: "Mike Hammett" <af...@ics-il.net> > To: af@afmug.com > Sent: Thursday, March 24, 2016 8:55:53 AM > Subject: Re: [AFMUG] Cambium Support for LibreNMS > > Did you get someone from Cambium? > > > > > ----- > Mike Hammett > Intelligent Computing Solutions > > Midwest Internet Exchange > > The Brothers WISP > > > > > ----- Original Message ----- > > From: "Steve" <li...@wavedirect.org> > To: af@afmug.com > Sent: Tuesday, March 22, 2016 8:51:42 AM > Subject: Re: [AFMUG] Cambium Support for LibreNMS > > Forgot to mention limited support for CMM 3.x and 4.x. We need to add > all the network info, but it does graph the GPS stats. More will be coming. > > Also some devices graph CRC errors, jitter, data rate, modulation > mode, SSR, temperature and other indicators we thought would be useful > to monitor. > > ----- Original Message ----- > From: "Steve" <li...@wavedirect.org> > To: af@afmug.com > Sent: Tuesday, March 22, 2016 9:40:44 AM > Subject: [AFMUG] Cambium Support for LibreNMS > > On a side note - anyone have any Cambium contacts on the list I can > talk to about getting permission to use their logo? > > We've added our first pass at detection and graphing for these series > of devices. (Pretty much only the devices we had access to > immediately) > > PMP100 (AP and SM) > PMP450(AP and SM) > EPMP (AP and SM) > PTP 100 > PTP 200/230 > PTP 250 > PTP 450 > PTP 650 > EPTP > > We are just putting in our pull request today so it should take a day > or so to get merged into the main branch. This is far superior to > Observium's limited support (actually all it really adds is limited > detection). > > We have actually added "Signal" as a sensor under "Health" and you can > set up a notification for each device if a signal drops below your > predefined threshold. Since most of us use some form of signal as a > measure of how good a connection is it made sense to make it a sensor. > > We are also considering adding GPS status under health, as well as SNR > (for those devices that support it). > > We are asking for your feedback and help in testing the bugs, and how > to improve the look/feel. > > Here are a couple screen shots (we only focused on getting it working > and not really how it looked immediately) > > http://imgur.com/a/CtTXy > > > FYI this is a shared list account so myself or others here may respond > to you. If you wish to contact me directly I can be reached at steve > at wavedirect dot net >
