I'm dealing with amateurs apparently. Anyone local to Utah that I can pay to drive over and aim this like a PRO?
Better yet, someone that knows Ceragon? I'm about to punch someone :( -----Original Message----- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown Sent: Friday, April 1, 2016 6:03 PM To: af@afmug.com Subject: Re: [AFMUG] How long to Aim? Make sure to set the elevation angle dead nuts on with a digital level from Home Depot. That takes care of part of the problem. -----Original Message----- From: Ken Hohhof Sent: Friday, April 01, 2016 6:01 PM To: af@afmug.com Subject: Re: [AFMUG] How long to Aim? How close are you to calculated? And are they aligning both ends simultaneously? Something is not right. Either someone is being anal about getting the last half dB, or they're on a sidelobe, or have the polarization wrong, or you don't have LOS. If they are tens of dB off, probably sidelobe. Get them to sweep a wider arc, also use a voltmeter on the BNC connector rather than calling out numbers. -----Original Message----- From: Sterling Jacobson Sent: Friday, April 01, 2016 6:51 PM To: 'af@afmug.com' Subject: [AFMUG] How long to Aim? How long does it take three people to aim a 10 mile 11Ghz link with 3' dishes? I don't know, it's still going on over three hours now...
