If you want to take this offlist we can. Galvanized would be best, but not if it will be a month. I can paint it worst case. I could probably wait a couple of weeks.
On Tue, Apr 12, 2016 at 1:32 PM, Chuck McCown <ch...@wbmfg.com> wrote: > Short answer yes. I presume you would like it to be galvanized. That > could add a month depending on where we are in our galvanization cycle. > > *From:* Jeremy <jeremysmi...@gmail.com> > *Sent:* Tuesday, April 12, 2016 1:30 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Telephone pole mount.. Dish / Sector.. > > Can I get a beta? It is for a big dish on a big pole. > > On Tue, Apr 12, 2016 at 1:14 PM, Chuck McCown <ch...@wbmfg.com> wrote: > >> OK, you are talking about an M-POL-3P-24. That one is still in beta but >> we are essentially done changing it. Made for big poles. >> >> *From:* Jeremy <jeremysmi...@gmail.com> >> *Sent:* Tuesday, April 12, 2016 12:44 PM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] Telephone pole mount.. Dish / Sector.. >> >> Actually Chuck, I just checked. I usually mount them to 3" IMC and that >> is the limit. 3" IMC is actually 3.5" O.D. so that will work. >> >> On Tue, Apr 12, 2016 at 12:39 PM, Jeremy <jeremysmi...@gmail.com> wrote: >> >>> It has been 30 days. Any chance you can send one of these to me? First >>> I need to verify the pipe diameter. I will be using a UBNT dish and >>> anything larger than 3" will not fit. >>> >>> On Mon, Mar 14, 2016 at 6:52 PM, Jeremy <jeremysmi...@gmail.com> wrote: >>> >>>> FYI, UBNT dishes will not fit on a 3.5" pipe. They will fit on a 3" >>>> pipe (except the new 620 fine adjustment kit...it will fit by changing out >>>> the carriage bolts). >>>> >>>> On Mon, Mar 14, 2016 at 6:49 PM, Chuck McCown <ch...@wbmfg.com> wrote: >>>> >>>>> I have not checked out the commscope unit. >>>>> >>>>> This has a large pipe 3.5” I think 24” long, will fit any pole over >>>>> 10” dia. >>>>> Very heavy duty. We could do you a one off in about 30 days. Not >>>>> fully into production yet. >>>>> MSRP is roughly $200 with you supplying the chain. >>>>> >>>>> *From:* Peter Kranz <pkr...@unwiredltd.com> >>>>> *Sent:* Monday, March 14, 2016 6:47 PM >>>>> *To:* af@afmug.com >>>>> *Subject:* Re: [AFMUG] Telephone pole mount.. Dish / Sector.. >>>>> >>>>> >>>>> Hi Chuck, How long until this is in distribution? If it’s not >>>>> available for 30 days, have you checked out that CommScope unit? >>>>> >>>>> >>>>> >>>>> >>>>> *Peter Kranz*www.UnwiredLtd.com <http://www.unwiredltd.com/> >>>>> Desk: 510-868-1614 x100 >>>>> Mobile: 510-207-0000 >>>>> pkr...@unwiredltd.com >>>>> >>>>> >>>>> >>>>> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Chuck McCown >>>>> *Sent:* Monday, March 14, 2016 5:44 PM >>>>> *To:* af@afmug.com >>>>> *Subject:* Re: [AFMUG] Telephone pole mount.. Dish / Sector.. >>>>> >>>>> >>>>> >>>>> Actually my new one is much better. >>>>> >>>>> Not on the web site yet or in the dealer price lists. >>>>> >>>>> >>>>> >>>>> *From:* Josh Reynolds <j...@kyneticwifi.com> >>>>> >>>>> *Sent:* Monday, March 14, 2016 5:27 PM >>>>> >>>>> *To:* af@afmug.com >>>>> >>>>> *Subject:* Re: [AFMUG] Telephone pole mount.. Dish / Sector.. >>>>> >>>>> >>>>> >>>>> http://www.mccowntech.com/chain-mount/ >>>>> >>>>> >>>>> >>>>> On Mon, Mar 14, 2016 at 6:26 PM, Peter Kranz <pkr...@unwiredltd.com> >>>>> wrote: >>>>> >>>>> Need to mount a 24” dish and a sector antenna to a telephone pole.. >>>>> Anyone used these things? The right way to go? It’s a heavy wind area.. >>>>> Kinda looks like you just throw some lag bolts in and you are good to go. >>>>> >>>>> >>>>> >>>>> https://www.tessco.com/products/displayProductInfo.do?sku=367000 >>>>> >>>>> >>>>> >>>>> >>>>> *Peter Kranz*www.UnwiredLtd.com <http://www.unwiredltd.com/> >>>>> Desk: 510-868-1614 x100 <510-868-1614%20x100> >>>>> Mobile: 510-207-0000 >>>>> pkr...@unwiredltd.com >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > >
