04/13/2016 : 11:09:46 UTC : :Reset due to error setting transmit frequency
5540 at temperature 24 C
04/13/2016 : 11:10:46 UTC : :Forced reset;
04/13/2016 : 11:10:46 UTC :
******System Startup******
System Reset Exception -- Watchdog Reset Cur ExtInt 0 Max ExtInt 0 Cur
DecInt 0 Max DecInt 0 Cur Sync 0 Max Sync 0 Cur LED 2 Max LED 1 Cur WDOG 0
Max WDOG 1 Cur EthXcvr 0 Max EthXcvr 1 Cur FEC 0 Max FEC 0 Cur FPGA 0 Max
FPGA 2572 Cur FrmLoc 0 Max FrmLoc 0 Cur WatchDog 33 Max WatchDog 33
RTMLogStats 0 AAState 0
Software Version : CANOPY 13.2 SM-DES
Board Type : P11
Device Setting : 5.4/5.7GHz MIMO OFDM - Subscriber Module -
0a-00-3e-b2-04-4e
FPGA Version : 081514
FPGA Features : DES, Sched;
Note that the AP is on 5835 MHz, so I don't know why it says 5540.
-----Original Message-----
From: George Skorup
Sent: Wednesday, April 13, 2016 1:08 PM
To: [email protected]
Subject: Re: [AFMUG] 450 "silent watchdog reset" question
It's not the same problem. The 450 AP and SM are different FPGAs. I do
see stack dumps and watchdog resets on SMs sometimes. I suspect that's
radios on crappy power/no UPS. Although, I have seen stuck VCs followed
by a dump and reset a few times.
Also, Aaron did say that the 450 hardware doesn't have a reboot
mechanism. So when you "reboot" a radio, they kill off stuff and let the
watchdog timer expire which then resets the board. So that's why you see
watchdog reset - user initiated reset, reboot from webpage or whatever.
On 4/13/2016 12:01 PM, Ken Hohhof wrote:
Is this just on APs, or also on SMs?
