Chuck, you are always our guy! Sent from my iPad
> On May 4, 2016, at 2:45 PM, Chuck McCown <ch...@wbmfg.com> wrote: > > OK > > I am probably not your guy anyway, I have made some metal pedestals for DLC > cabinets and other things like that. > > I am limited in the size of my press brake and shear. I can plasma cut and > weld all day long. But when someone needs small intricate parts bent up I > have my limits. > > From: Wireless Administrator > Sent: Wednesday, May 04, 2016 3:43 PM > To: af@afmug.com > Subject: Re: [AFMUG] Source for equipment enclosures > > Chuck I’ve got an engineering document prepared by them but in all fairness I > should not re-distribute it. If you’re interested I can describe it off list. > > Steve B. > > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Chuck McCown > Sent: Wednesday, May 04, 2016 5:37 PM > To: af@afmug.com > Subject: Re: [AFMUG] Source for equipment enclosures > > Depends on the design. I do some fabrication like this. > Nothing too fancy. > > From: Wireless Administrator > Sent: Wednesday, May 04, 2016 3:33 PM > To: af@afmug.com > Subject: [AFMUG] Source for equipment enclosures > > Can anyone recommendation a supplier for custom stainless equipment > enclosures in the $1700 range. Based on comments here we contracted to have > ours built by Bison ProFab but that has been a disaster. We started working > with them on 2/11 and they still do not have our first enclosure completed. > None of the commitments they made have been realized. > > Can anyone recommend a reliable source? > > Steve B. > > !DSPAM:2,572a6d78150638569723818!