We use Altech Corp CBI243A: http://www.alliedelec.com/altech-corp-cbi243a/70236398/
We're in a cool climate and the box is in a shaded area so we haven't put vent/fans in (yet). Probably a good idea to do so just to be safe. -Rob On Fri, May 6, 2016 at 5:20 AM, Christopher Gray <cg...@graytechsoftware.com> wrote: > Rob, > > What are you using for your charger? > > > ________________________________ > > On Wed, May 4, 2016 at 7:21 PM, Rob Genovesi <r...@corp.coastside.net> wrote: >> >> Netonix switches have been great for us. We're using the DC model >> with a few batteries for backup. The Netonix takes 9-60 VDC in and >> can output 24V or 48V (configurable by port). Perfect for powering a >> 24V Mikrotik and a few 48V radios. >> >> -Rob >> >> >> >> On Wed, May 4, 2016 at 3:02 PM, Christopher Gray >> <cg...@graytechsoftware.com> wrote: >> > For my routed 100 Mbps micro repeater sites I've been running MikroTik >> > RB750P routers for both routing traffic and powering radios (With good >> > results). >> > >> > I want to setup my first small routed 1 Gbps repeater site using 2x B5 >> > backhaul links and 1x A5 PtMP. What are others using to run a small >> > routed >> > site that runs 48V Gigabit radios? >> > >> > I'm considering a RB750G with a Netonix WS-6-MINI, but using a Netonix >> > as a >> > power injector seems a little overkill. > >
