Could just be my eyes. From: Matt Mangriotis Sent: Monday, May 16, 2016 9:34 PM To: af@afmug.com Subject: Re: [AFMUG] Gigabit Ethernet on Cambium 450i only running 100Mbps
We’re looking into this Ken… our engineering team is trying to replicate. Will update your forum thread with results once figured out. Matt From: Af [mailto:af-boun...@afmug.com] On Behalf Of Ken Hohhof Sent: Monday, May 16, 2016 9:23 PM To: af@afmug.com Subject: Re: [AFMUG] Gigabit Ethernet on Cambium 450i only running 100Mbps No, the reason I’m asking is I’m seeing the LED totally off when running at 1000 Mbps. Not orange like the user guide says. What I am seeing on the actual AP is: 10M: red 100M: green 1000M: off, nothing, nada, zilch, dark, devoid of visible radiation It really screwed me up because I thought there was no link, until I realized it was working fine at 1000FDX and reporting 1000FDX in the GUI. From: Eric Kuhnke Sent: Monday, May 16, 2016 8:51 PM To: af@afmug.com Subject: Re: [AFMUG] Gigabit Ethernet on Cambium 450i only running 100Mbps I've seen this a lot - the Intel 1000BaseT server NICs all use yellow-orange for an active 1000Mbps link, and green for 100Mbps. Seems counter intuitive but it is sort of a 'standard'. Such as the i350-T2 and others. http://www.intel.com/content/www/us/en/support/network-and-i-o/ethernet-products/intel-gigabit-server-adapters/intel-ethernet-server-adapter-i350-series/intel-ethernet-server-adapter-i350-t2.html On Mon, May 16, 2016 at 4:51 PM, Josh Reynolds <j...@kyneticwifi.com> wrote: That sounds really backwards compared to most gear I'm familiar with. On Mon, May 16, 2016 at 6:18 PM, Ken Hohhof <af...@kwisp.com> wrote: I have a question while we are on the topic: what color is the last LED on your 450i AP when it is running at 1000 Mbps? I know it’s green at 100 Mbps, but what about 1000 Mbps? I know the user guide says orange, but is that what your AP actually does? From: David Sent: Monday, May 16, 2016 3:22 PM To: af@afmug.com Subject: Re: [AFMUG] Gigabit Ethernet on Cambium 450i only running 100Mbps I am only catching part of this thread so dont throw anything at me for not reading the whole thread. 450i radios are rated for the 56v unlike the 450 radios they are rated for cambium std 29v This is the reason I am having to upgrade all of my boxes to 48v plant as its base supply. On 05/16/2016 11:35 AM, Chuck McCown wrote: I have an idea. Working on an experiment. From: Wireless Administrator Sent: Monday, May 16, 2016 8:56 AM To: af@afmug.com Subject: Re: [AFMUG] Gigabit Ethernet on Cambium 450i only running 100Mbps Thanks for having a look at this for us. It sure doesn’t make sense to me. The system continues to run 1000Base-T Full Duplex here with the Cambium units. I’m sure there is a reason but it looks like this one’s above my pay grade. Steve B. From: Af [mailto:af-boun...@afmug.com] On Behalf Of ch...@wbmfg.com Sent: Sunday, May 15, 2016 2:26 PM To: af@afmug.com Subject: Re: [AFMUG] Gigabit Ethernet on Cambium 450i only running 100Mbps No Joy. Everything checks out 100%. I bought one the cambium units for comparison. Its impulse breakdown voltage is about 5 volts to ground lower than my unit for single pin to ground. Transverse impulses are clamped much lower on the cambium unit but normally that is not an issue. Pin to pin and pin to ground I have less capacitive loading than the cambium unit. They have some other circuitry that I have yet to puzzle out. Something that is not related to surge suppression. In any event, your unit, a brand new unit from my stock and the cambium unit all show 1Gbps on the traffic tester and all show good wiring continuity and all show good breakdown voltage pin to ground. Visual inspections are not revealing any solder bridges or manufacturing issues.... A puzzle for certain. But I am not finished. Stay tuned... From: Wireless Administrator Sent: Friday, May 6, 2016 9:16 AM To: af@afmug.com Subject: [AFMUG] Gigabit Ethernet on Cambium 450i only running 100Mbps Replaced This …… With This ……. On same ground point and got This …… :-) Except I want this to work ……. L Extra effort to ensure clear pictures and easy to read story line …… Steve From: Wireless Administrator [mailto:wirel...@htn.net] Sent: Friday, April 29, 2016 12:03 PM To: 'af@afmug.com' Subject: Gigabit Ethernet on Cambium 450i We’re not able to get our Cambium 450i radio’s Ethernet Interface to run at Gigabit speed. Our setup is as follows: Gigabit switch (Tried several brands) à14’ Cat6 Patch àGigabit Sync injector (48V) à 35’ Best-tronics Cat5 Shielded à 800-800-GIGE-APC-HV à 80’ Best-tronics Cat5 Shielded à Cambium 450i It works without the 800-800-GIGE-APC-HV. (Cat5 Coupler). Anyone ………. Steve B.
