1090CKHH = gig ports?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Jun 3, 2016 at 4:08 PM, Matt Mangriotis < matt.mangrio...@cambiumnetworks.com> wrote: > For clarification: > > > > 1090CKHH is CMM4 in the outdoor cabinet with included EtherWAN switch > > 1091HH is the same CMM4 in the outdoor cabinet, but without the switch > > 1092HH is the rackmount version (i.e. no cabinet) of the CMM4, also > without the switch > > > > All of them can support both 56 and 30 VDC power to different Cambium > radios. > > > > Matt > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Luthman > *Sent:* Friday, June 03, 2016 3:04 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] 802.3at Switch for PMP450i > > > > Sure looks like it, but the 1091HH does not have a switch > > > > https://www.streakwave.com/mmSWAVE1/Video/CMM4_Specs.pdf > > > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Fri, Jun 3, 2016 at 4:01 PM, Matt <matt.mailingli...@gmail.com> wrote: > > > Mikrotik rb2011 + Packetflux gig SyncInjector > > What I am currently using. Takes up to much space for this site. > > Just remembered, standard switch won't output sync, brain took Friday > off. Does the "Cambium 1091HH" support 48 and 24 volt gear? Cannot > find it on Cambium website. Awful expensive too. > > Will be nice when Forest gets his new gadgets out. > > > > >> What is everyone using as an affordable 802.3at managed switch to > >> power up PMP450i and PTP450i units? Would be so nice if Mikrotik had > >> one. > > >