Seth you are correct. Stick with a 450i in that case. Craig Schmaderer Cell 402-380-1245 Skywave Wireless, Inc.
On Wed, Jun 22, 2016 at 12:28 PM -0500, "Bill Prince" <part15...@gmail.com<mailto:part15...@gmail.com>> wrote: You can't do that kind of spatial diversity in a PTP link. bp <part15sbs{at}gmail{dot}com> On 6/22/2016 10:11 AM, Kurt Fankhauser wrote: Will there be a PTP version of Medusa that can triple the throughput of existing PTP650 links on the same channel width? I am wondering why the same massive-mimo can't be applied to PTP so a 450mbps PTP650 link running on 45mhz channel can then achieve 1.35Gbps on the same 45mhz channel? On Wed, Jun 22, 2016 at 1:05 PM, Josh Luthman <j...@imaginenetworksllc.com<mailto:j...@imaginenetworksllc.com>> wrote: Are these uplink and downlink? The epmp 2000 is only uplink. Josh Luthman Office: 937-552-2340<tel:937-552-2340> Direct: 937-552-2343<tel:937-552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Jun 22, 2016 12:54 PM, "Peter Kranz" <pkr...@unwiredltd.com<mailto:pkr...@unwiredltd.com>> wrote: With the ETI beamformer antenna.. you get ~20db gain since you have the electrical capture of all the active antennas going on.. in theory creating a high gain very narrow spot beam of 15 degrees or so.. 14 implies something else.. Peter Kranz <http://www.unwiredltd.com/>www.UnwiredLtd.com<http://www.UnwiredLtd.com> Desk: 510-868-1614 x100<tel:510-868-1614%20x100> Mobile: 510-207-0000<tel:510-207-0000> pkr...@unwiredltd.com<mailto:pkr...@unwiredltd.com> From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of Bill Prince Sent: Wednesday, June 22, 2016 9:51 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] 450m They beam-form the power coming in. bp <part15sbs{at}gmail{dot}com> On 6/22/2016 9:40 AM, Craig Schmaderer wrote: Over poe though? That's pushing a lot of watts over it, I didn't hear them say it had a separate power port? From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Reynolds Sent: Wednesday, June 22, 2016 11:40 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] 450m 48v to 56 or 59v I believe On Wed, Jun 22, 2016 at 11:38 AM, Craig Schmaderer <<mailto:cr...@skywaveconnect.com>cr...@skywaveconnect.com<mailto:cr...@skywaveconnect.com>> wrote: Spec sheet says 70watts, how are we going to power this thing, they never said the power options did they? From: Af [mailto:<mailto:af-boun...@afmug.com>af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of Daniel White Sent: Wednesday, June 22, 2016 11:37 AM To: <mailto:af@afmug.com> af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] 450m Yes there is a GigE roadmap that includes 40MHz channels. Daniel White Managing Director - Hardware Distribution Sales ConVergence Technologies Cell: +1 (303) 746-3590<tel:%2B1%20%28303%29%20746-3590> <mailto:dwh...@converge-tech.com>dwh...@converge-tech.com<mailto:dwh...@converge-tech.com> From: Af [<mailto:af-boun...@afmug.com>mailto:af-boun...@afmug.com] On Behalf Of Kurt Fankhauser Sent: Wednesday, June 22, 2016 10:30 AM To: <mailto:af@afmug.com> af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] 450m Any plans to offer 40mhz channel on this thing for 800-1000mbps throughput? On Wed, Jun 22, 2016 at 12:22 PM, Mike Hammett <<mailto:af...@ics-il.net>af...@ics-il.net<mailto:af...@ics-il.net>> wrote: That does a lot of nothing now. ----- Mike Hammett Intelligent Computing Solutions<http://www.ics-il.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/ICSIL>[http://www.ics-il.com/images/googleicon.png]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/intelligent-computing-solutions>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/ICSIL> Midwest Internet Exchange<http://www.midwest-ix.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/mdwestix>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/midwest-internet-exchange>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/mdwestix> The Brothers WISP<http://www.thebrotherswisp.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/thebrotherswisp>[http://www.ics-il.com/images/youtubeicon.png] <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> ________________________________ From: "Bill Prince" <<mailto:part15...@gmail.com>part15...@gmail.com<mailto:part15...@gmail.com>> To: <mailto:af@afmug.com> af@afmug.com<mailto:af@afmug.com> Sent: Wednesday, June 22, 2016 11:21:33 AM Subject: Re: [AFMUG] 450m Take whatever you like from here: <https://www.youtube.com/watch?v=YO9JfpcaZRA>https://www.youtube.com/watch?v=YO9JfpcaZRA bp <part15sbs{at}gmail{dot}com> On 6/22/2016 9:17 AM, Matt wrote: There is a webinar going on now as we speak introducing the product. Is there anywhere to download slides or video from the webinar? [https://ipmcdn.avast.com/images/2016/icons/icon-envelope-tick-round-orange_184x116-v1.png]<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon> Virus-free. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link> www.avast.com<http://www.avast.com>