If your chains are off by 10db there is interference or your pointing into power lines corn or part of a tree also that's very close to to the tower be sure you have the right up tilt on the nanobeam and running the latest firmware
Also you did not say what nanobeam you have if you are using the small flash light style nano beam many have reported that 1 has a weaker antenna then the old N gear antenna's On Mon, Jun 27, 2016, 1:32 AM TJ Trout <t...@voltbb.com> wrote: > I have a rocket 5ac lite connected to the large 5ghz omni with two > nanobeam ac's connected to it, one about 1000ft away and the other 2000ft > away and one has a signal of -70 and the other -64, both are absolutely > clear LOS and on both clients the chain 0 and chain 1 are 10db off from > each other... > > I don't think it's possible to get the sma cables reversed so it can't be > backwards, both units are at full power 26 and 27dbm on the rocket, I would > expect like -30 or -40 at this distance... > > Any idea what I'm doing wrong here? This is my first test of AC but I know > with the N stuff the signal would be atleast 20db better at the same output > power... > > Ideas? >
