I have seen odd issues when the SMA is not tight enough.. sometimes they bind while screwing on. Had it happen once or twice.
On Mon, Jun 27, 2016 at 1:18 AM, timothy steele <timothy.pct...@gmail.com> wrote: > If your chains are off by 10db there is interference or your pointing into > power lines corn or part of a tree also that's very close to to the tower > be sure you have the right up tilt on the nanobeam and running the latest > firmware > > Also you did not say what nanobeam you have if you are using the small > flash light style nano beam many have reported that 1 has a weaker antenna > then the old N gear antenna's > > On Mon, Jun 27, 2016, 1:32 AM TJ Trout <t...@voltbb.com> wrote: > >> I have a rocket 5ac lite connected to the large 5ghz omni with two >> nanobeam ac's connected to it, one about 1000ft away and the other 2000ft >> away and one has a signal of -70 and the other -64, both are absolutely >> clear LOS and on both clients the chain 0 and chain 1 are 10db off from >> each other... >> >> I don't think it's possible to get the sma cables reversed so it can't be >> backwards, both units are at full power 26 and 27dbm on the rocket, I would >> expect like -30 or -40 at this distance... >> >> Any idea what I'm doing wrong here? This is my first test of AC but I >> know with the N stuff the signal would be atleast 20db better at the same >> output power... >> >> Ideas? >> >