Cambium/Ceragon have an adapter kit for most major brands/interfaces, including Dragonwave.
Jeff Broadwick ConVergence Technologies, Inc. 312-205-2519 Office 574-220-7826 Cell [email protected] > On Jun 28, 2016, at 1:46 PM, Chuck McCown <[email protected]> wrote: > > No need for worst case. I can make any radio fit any antenna and vice versa. > > From: Daniel White > Sent: Tuesday, June 28, 2016 11:31 AM > To: [email protected] > Subject: Re: [AFMUG] Dragonwave 18Ghz mount compatibility? > > DragonWave. > > The interface designs are proprietary by every manufacturer. The only reason > Remec became a standard was that Remec ODU’s were used by so many > manufacturers for a few years. Remec basically gave away their design. This > is how manufacturers protect antenna sales (distributors could buy Remec > antennas direct from the manufacturers, other OEM’s do not allow the antenna > manufacturers to sell the antennas to anyone but the OEM typically). > > Many manufacturers have adapters from one brand to another, and worst case > you could always get a remote mount kit and convert to waveguide (although > with a 2ft antenna your better buying a new antenna). > > Daniel White > Managing Director – Hardware Distribution Sales > ConVergence Technologies > Cell: +1 (303) 746-3590 > [email protected] > > From: Af [mailto:[email protected]] On Behalf Of Peter Kranz > Sent: Tuesday, June 28, 2016 11:19 AM > To: [email protected] > Subject: [AFMUG] Dragonwave 18Ghz mount compatibility? > > What other vendors use the same mount as Dragonwave? > > <image001.jpg> > > Peter Kranz > www.UnwiredLtd.com > Desk: 510-868-1614 x100 > Mobile: 510-207-0000 > [email protected] > > > Virus-free. www.avast.com
