All of the Force200's we have used came with 2.6-RC13 I believe. We just
got some more in the other day so now I'm wondering what's on them.
On 7/8/2016 5:59 PM, Mathew Howard wrote:
Yeah, it's strange because the Force 200's all just came with 2.6.1
(or maybe even older... I'm not sure)... it makes me wonder if there
was a hardware change that required new firmware.
The ePMP 2000's that we just got came with RC firmware, but that I
don't have a problem with since it's a new product and they obviously
wanted to get them out there as quick as they could... and they
require 3.0, which hasn't been released yet.
On Fri, Jul 8, 2016 at 10:56 AM, Ken Hohhof <af...@kwisp.com
<mailto:af...@kwisp.com>> wrote:
Seems like a questionable practice shipping product with beta
firmware, unless the product itself is still in beta.
For that matter, the whole “release candidate” designation is
confusing. Is that like “presumptive nominee”? It’s either
released, or it’s beta.
*From:* Mathew Howard <mailto:mhoward...@gmail.com>
*Sent:* Friday, July 08, 2016 10:25 AM
*To:* af <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] ePMP Force 200
Same here, we always update to the current stable firmware and
load a template on every radio before it leaves the office. It's
odd they're shipping these with an RC though... one of our guys
asked me yesterday if he needed to update one to 2.6.2 since it
was already 2.6.2RC.
On Fri, Jul 8, 2016 at 10:01 AM, Josh Luthman
<j...@imaginenetworksllc.com <mailto:j...@imaginenetworksllc.com>>
wrote:
It's always been standard for us to update and template the
radio in the cool office before heading outside.
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Jul 8, 2016 at 10:59 AM, Vince West
<vi...@shelbybb.com <mailto:vi...@shelbybb.com>> wrote:
Thanks for the heads up on that. I am working on
scheduling some upgrades to take place on Sunday evening.
All of our current gear is 2.6.2.
Have you loaded 3.0-RC27 on any of them yet?
Vince West
Tower Hand
Technical Support
Shelby Broadband
148 Citizens Blvd
Simpsonville, KY 40067
Phone: 1-888-364-4232 <tel:1-888-364-4232>
On Fri, Jul 8, 2016 at 8:39 AM, Andy Trimmell
<atrimm...@precisionds.com
<mailto:atrimm...@precisionds.com>> wrote:
I just got a new shipment of Force 200 5ghz in
yesterday and configured them and sent them out on
2.62RC from the factory. Don’t let them leave the shop
with that firmware. It’s missing about 40 freqs in the
DFS ranges. Tech spent an hour service call figuring
it out after hours.
Just upgrade the firmware to 2.62 even though it’s a
2.62RC from the factory. Just fyi to anyone trusting
Cambium before the truck rolls. If this has already
been said I apologize I missed it somewhere.
Andy Trimmell
/Systems Engineer/
*PDS Connect*
317-831-3000 <tel:317-831-3000>