Yep, I see the 1x. Just trying to figure out which radio it would be and how best to troubleshoot it. Josh, got any clarification on what you mean?
On Mon, Jul 18, 2016 at 5:24 PM, George Skorup <geo...@cbcast.com> wrote: > Look at your remote mod rate. 1X. That's what the remote is transmitting > towards the local end. I believe when they're in SISO, the Chain 1 signal > reading is meaningless. > > On 7/18/2016 6:20 PM, Sam Lambie wrote: > > I'll look tomorrow. It's beer 30 here. > > On Mon, Jul 18, 2016 at 5:19 PM, Josh Reynolds <j...@kyneticwifi.com> > wrote: > >> Anything in the path? >> >> On Jul 18, 2016 6:11 PM, "Sam Lambie" <samtaos...@gmail.com> wrote: >> >>> I am seeing what I think is interference on a 24 ghz AirFiber. I tried >>> changing the channel from 24.1 to 24.2 but no go. Could the radio be going >>> bad or is there something else that I am missing? >>> The receive levels will bounce from -61 to -47 and then go away >>> completely on Chain1. With only 80+ mbps on the capacity. >>> Any suggestions welcomed. >>> >>> [image: Inline image 1] >>> >>> -- >>> -- >>> *Sam Lambie* >>> Taosnet Wireless Tech. >>> 575-758-7598 Office >>> www.Taosnet.com <http://www.newmex.com> >>> >> > > > -- > -- > *Sam Lambie* > Taosnet Wireless Tech. > 575-758-7598 Office > www.Taosnet.com <http://www.newmex.com> > > > -- -- *Sam Lambie* Taosnet Wireless Tech. 575-758-7598 Office www.Taosnet.com <http://www.newmex.com>