I keep being tempted by AIMS power.
What stops me is there's no provision for remote monitoring. The
"remote port" is for a control panel at max 10m from the unit.
If it had status relays that would be something. Even nicer would be a
network module with Web/SNMP access like an APC. I suppose if you add
something to monitor battery voltage and the AC power status then you
could make do.
------ Original Message ------
From: "SmarterBroadband" <li...@smarterbroadband.com>
To: af@afmug.com
Sent: 7/22/2016 12:18:34 PM
Subject: Re: [AFMUG] Inverter / Charger UPS
For example
http://www.theinverterstore.com/2000-watt-pure-sine-inverter-charger-48-volt.html
Adam
From: Af [mailto:af-boun...@afmug.com] On Behalf Of SmarterBroadband
Sent: Friday, July 22, 2016 9:10 AM
To:af@afmug.com
Subject: [AFMUG] Inverter / Charger UPS
We have been using 48v APC UPS’s in our cabinets, removing the internal
batteries and adding 4 large Deeps Cycles batteries.
Seems to be a waste of cabinet space to continue doing this.
Has anyone used Inverter Charges to replace a UPS?
I assume we should only look at Pure Sine Wave? Most of these seem to
be at 12 volts.
Like to hear what has worked for others.
Thanks
Adam