Like primary channel and backup channels?
Seems like they could store in RAM what the most recently connected
channel was, and scan that channel a few times before going through the
whole scan list. Seems like it would reduce the service impact of a
re-reg. Just sayin....
Is Aaron Schneider listening today?
------ Original Message ------
From: "Matt" <matt.mailingli...@gmail.com>
To: "af@afmug.com" <af@afmug.com>
Sent: 8/10/2016 6:06:34 PM
Subject: Re: [AFMUG] Increase PMP100 900 MHz Stability in High Noise?
If you go into the affected SM and disable all channels except for
the one
the AP is on then it will register faster. This doesn't stop the
re-reging
but makes it less noticeable.
I'm generally against that because then you can't change channels,
but
sometimes you do what you have to do.
I really wish Canopy had a feature to only scan certain channels for X
minutes, if unable to register in that time frame switch to another
bigger channel group to scan. That way if you are forced too switch
to a different channel and width due to interference etc. you can at
least get your SM's back on the AP.
