Very cool. I have looked into mag mounts before but they get expensive fast.
-Ty On Sat, Aug 20, 2016 at 9:04 PM, David Milholen <dmilho...@wletc.com> wrote: > We have used something similar for 12yrs on top of a water tank that > supports our pipe mounts > > that hold a MTOW-3P with one 450AP center and 2 outer fsk900 integrated > panels. The center had a 900fsk but > > we removed it to insert the new 450iAP 900 panel. There are 4 of those > pipe mounts on that tank and the other > > 2 mounts hold a MTOW-3P with 2 pmp450 3.65 AP panels > > One of our climbers actually tested the pipes to see if they were still > holding strong so he supported himself from the mount while staying tied > > off to the center mast on the tank. > > We also made a single pole mast with 2 of the smaller magnets that would > mount to red iron or most flat metal surface. > > We used it for holding the motorola WLAN CAN which weighed about 65lbs > after being mounted and our tech was able to stand on top of the mount > > without it moving. > > Those crazy Magnets LOL > > > > On 8/19/2016 6:25 PM, ch...@wbmfg.com wrote: > > https://youtu.be/s32uO9zQgEI > Sorry about the lousy audio.� This shows testing of a prototype mag > mount accessory to our tower mounts. > I think I can improve on this but it starts to cut loose at about 100-120 > lbs of force.� So I would not rate it over 50 lbs. > If there were 4 of these on one of our P mounts you could probably safely > mount a 100-200 lb antenna on it.� > > > -- >