There is probably something toxic in magnet production so we ship the work to the cast offs of humanity since they're expendable and cheap
On Aug 22, 2016 7:34 PM, "Josh Luthman" <j...@imaginenetworksllc.com> wrote: > Who's got magnets in the US? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Aug 22, 2016 7:58 PM, "Craig Schmaderer" <cr...@skywaveconnect.com> > wrote: > >> Chinese? Come on chuck keep the business local. Try mexico! >> >> Craig Schmaderer >> Cell 402-380-1245 >> Skywave Wireless, Inc. >> >> >> >> >> On Mon, Aug 22, 2016 at 1:56 PM -0500, "Chuck McCown" <ch...@wbmfg.com> >> wrote: >> >> Trying hard to keep the cost down. The magnets themselves are spendy. >> Trying to find a chinese source I can trust. >> >> *From:* Brian Sullivan <installe...@foxvalley.net> >> *Sent:* Monday, August 22, 2016 9:37 AM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] Something new >> >> +1 If the price is right, I have a couple places for these. >> Would like to see mounting configurations. >> >> On 8/22/2016 9:20 AM, Ty Featherling wrote: >> >> Very cool. I have looked into mag mounts before but they get expensive >> fast. >> >> >> >> -Ty >> >> On Sat, Aug 20, 2016 at 9:04 PM, David Milholen <dmilho...@wletc.com> >> wrote: >> >>> We have used something similar for 12yrs on top of a water tank that >>> supports our pipe mounts >>> >>> that hold a MTOW-3P with one 450AP center and 2 outer fsk900 integrated >>> panels. The center had a 900fsk but >>> >>> we removed it to insert the new 450iAP 900 panel. There are 4 of those >>> pipe mounts on that tank and the other >>> >>> 2 mounts hold a MTOW-3P with 2 pmp450 3.65 AP panels >>> >>> One of our climbers actually tested the pipes to see if they were still >>> holding strong so he supported himself from the mount while staying tied >>> >>> off to the center mast on the tank. >>> >>> We also made a single pole mast with 2 of the smaller magnets that would >>> mount to red iron or most flat metal surface. >>> >>> We used it for holding the motorola WLAN CAN which weighed about 65lbs >>> after being mounted and our tech was able to stand on top of the mount >>> >>> without it moving. >>> >>> Those crazy Magnets LOL >>> >>> >>> >>> On 8/19/2016 6:25 PM, ch...@wbmfg.com wrote: >>> >>> https://youtu.be/s32uO9zQgEI >>> Sorry about the lousy audio.� This shows testing of a prototype mag >>> mount accessory to our tower mounts. >>> I think I can improve on this but it starts to cut loose at about >>> 100-120 lbs of force.� So I would not rate it over 50 lbs. >>> If there were 4 of these on one of our P mounts you could probably >>> safely mount a 100-200 lb antenna on it.� >>> >>> >>> -- >>> >> >> >> >>