This is an ePMP 1000 connectorized. 2.4G From: George Skorup Sent: Tuesday, August 30, 2016 9:41 AM To: [email protected] Subject: Re: [AFMUG] Powering ePMP
The Force180 and 200's will take 15-30VDC (IIRC) using either polarity on the 4/5 and 7/8 pairs. GigE if you want. The GPS units are 802.3af compliant and also 29.5 or 48 passive + Sync-over-Power. So the same applies, either polarity. Also GigE. They want no less than 20vDC. And I believe no more than 58 or 60vDC. But as others have pointed out in the past, you should run them at 29.5 or 48-56 if you can because of the cold weather lockup issues when they're getting <24vDC at the radio. The old ePMP integrated units take only standard Canopy power, and no GigE. We have made polarity swap dongles to convert customers from UBNT (if they're not home), but now that those are EOL and the new Force stuff doesn't care about polarity, we just swap radios. On 8/30/2016 10:18 AM, Chuck McCown wrote: Not finding a true manual for the Netonix either. There are many options that I am not sure about. From: Jordan Gregory Sent: Tuesday, August 30, 2016 9:15 AM To: [email protected] Subject: Re: [AFMUG] Powering ePMP GPS synced or not? My ePMP 1000 w/ GPS are being powered by a netonix. SMs don't work though. On Aug 30, 2016 10:11 AM, "Chuck McCown" <[email protected]> wrote: When powering an ePMP, I notice that the power supply from Cambium shows 7&8 positive, 4&5 return. Is it not possible to power it directly from a Netonix WS-12-DC?
