I get no lights on the AP.
From: Josh Baird
Sent: Tuesday, August 30, 2016 9:26 AM
To: af@afmug.com
Subject: Re: [AFMUG] Powering ePMP
Netonix will power GPS sync ePMP models just fine on 24V or 48V, but we run
them all at 48V due to the cold-temp in-rush problems that occurred in early
ePMP firmware.
On Tue, Aug 30, 2016 at 11:22 AM, Chuck McCown <ch...@wbmfg.com> wrote:
It appears, due to the polarity, this cannot be done.
Netonix does not have an option to put positive on 7&8.
So I need to figure out how to put it in a POE passive pass through mode it
appears.
From: Jordan Gregory
Sent: Tuesday, August 30, 2016 9:19 AM
To: af@afmug.com
Subject: Re: [AFMUG] Powering ePMP
Just the standard 48V. 24 isn't enough and the 4pin 48VH isn't necessary.
On Aug 30, 2016 10:16 AM, "Chuck McCown" <ch...@wbmfg.com> wrote:
It has the GPS puck but I have not connected it yet. Just playing.
What Netonix poe setting do you use?
From: Jordan Gregory
Sent: Tuesday, August 30, 2016 9:15 AM
To: af@afmug.com
Subject: Re: [AFMUG] Powering ePMP
GPS synced or not?
My ePMP 1000 w/ GPS are being powered by a netonix. SMs don't work though.
On Aug 30, 2016 10:11 AM, "Chuck McCown" <ch...@wbmfg.com> wrote:
When powering an ePMP, I notice that the power supply from Cambium shows
7&8 positive, 4&5 return.
Is it not possible to power it directly from a Netonix WS-12-DC?
