we have confirmed that we are using the correct bolts that came with the radio to connect the radios to the Jirous dishes. so it's not a bolt issue.
On Tue, Aug 30, 2016 at 11:42 AM, Nick Bright <nick.bri...@valnet.net> wrote: > A friend of mine confirmed that you MUST use the bolts supplied by mimosa. > He had used the bolts that came with the dish, and it was about a 10dB > difference (worse). > > > On 8/30/2016 12:31 PM, Sean Heskett wrote: > > radios are directly connected to the Jirous 2' dishes with the hardware > supplied by mimosa. > > On Tue, Aug 30, 2016 at 11:30 AM, Erich Kaiser < > er...@northcentraltower.com> wrote: > >> Waveguide issue on dish? Wrong size ? >> >> On Aug 30, 2016 12:21 PM, "Sean Heskett" <af...@zirkel.us> wrote: >> >>> Hi Gang, >>> >>> I've already contacted mimosa support and they seem to be stumped too, >>> so i thought I'd check with y'all to see if you've seen the same issue. >>> >>> We have a B11 link that is 6 miles clear LOS (we currently have a >>> dragonwave horizon compact plus 18Ghz link in place that the B11 will be >>> replacing). The PCN states we should have a -42.5 the B11 interface states >>> we should have a -40.9. On the near side with is also the AP side we have >>> a -42 (as expected) however on the far side (station side) we have a >>> -53.2. Both sides are using the Jirous 2' dishes. We've tried swapping >>> radios on both sides, i've downgraded to 1.3.1 and back to 1.4.1 and we've >>> moved the dishes 5' vertically on both sides with no change. the station >>> side is always about 10-12db worse. We are not on a sidelobe since the >>> other radio is at expected signal level. >>> >>> Mimosa has stated they are "looking into it" and they have another >>> customer with a similar problem. I've provided them VPN access and they >>> have run some diagnostic scripts. It's been almost 2 weeks since I first >>> contacted mimosa and they don't have any answer other than "we are working >>> on it". >>> >>> I'm ready to switch vendors to another product. We have to get this link >>> live because it's going to start snowing here soon. Anyone else have this >>> issue or have any other ideas of what to try?? >>> >>> -Sean >>> >>> >> _______________________________________________ >> Members mailing list >> memb...@wispa.org >> http://lists.wispa.org/mailman/listinfo/members >> >> > > > _______________________________________________ > Members mailing > listMembers@wispa.orghttp://lists.wispa.org/mailman/listinfo/members > > > > -- > ----------------------------------------------- > - Nick Bright - > - Vice President of Technology - > - Valnet -=- We Connect You -=- - > - Tel 888-332-1616 x 315 / Fax 620-331-0789 - > - Web http://www.valnet.net/ - > ----------------------------------------------- > - Are your files safe? - > - Valnet Vault - Secure Cloud Backup - > - More information & 30 day free trial at - > - http://www.valnet.net/services/valnet-vault - > ----------------------------------------------- > > This email message and any attachments are intended solely for the use of the > addressees hereof. This message and any attachments may contain information > that is confidential, privileged and exempt from disclosure under applicable > law. If you are not the intended recipient of this message, you are > prohibited from reading, disclosing, reproducing, distributing, disseminating > or otherwise using this transmission. If you have received this message in > error, please promptly notify the sender by reply E-mail and immediately > delete this message from your system. > > > _______________________________________________ > Members mailing list > memb...@wispa.org > http://lists.wispa.org/mailman/listinfo/members > >
