Telrad or Trango support? Sent from my iPhone
> On Sep 6, 2016, at 9:15 PM, Adam Moffett <dmmoff...@gmail.com> wrote: > > I just realized I suck at commas. My apologies to grammar nazis. > > > ------ Original Message ------ > From: "Adam Moffett" <dmmoff...@gmail.com> > To: "Animal Farm" <af@afmug.com> > Sent: 9/6/2016 9:14:08 PM > Subject: [AFMUG] Trango Apex Lynx/Orion feature request > >> I submitted the feature request below to Telrad's online ticketing system >> earlier today, and they replied that they'll pass the request to >> engineering. If you use either the Apex Lynx or Apex Orion and if you agree >> with what I'm saying below then please add your voice to mine and ask for >> this feature. >> >> "" >> Feature Request: I think each interface on the Apex Lynx should have a local >> management IP address. One on the SFP port, one on the CAT5 port, and one on >> the RF interface. As an example, many units from Cambium have an address of >> 169.254.1.1 which is always accessible when directly attached to the >> ethernet port. >> >> I think right now if I was to configure a unit for OOB management via GE1, >> then if GE1 was damaged I would permanently lose access to the device. If I >> configure for in band management via fiber, then I could (due to >> misconfiguration or malfunction) lose access to the device and require a >> climber to go up and press the reset button to restore access. Feel free to >> correct me if I have a misconception here, otherwise please consider adding >> permanent local IP's. >> "" >>
