They have like eleventy billion $, I'm sure they can afford some spares.

On 9/23/2016 2:41 PM, Adam Moffett wrote:
Maybe it's easier for them to keep spares if every link is the same equipment.
------ Original Message ------
From: "Eric Kuhnke" <eric.kuh...@gmail.com <mailto:eric.kuh...@gmail.com>>
To: "af@afmug.com" <af@afmug.com <mailto:af@afmug.com>>
Sent: 9/23/2016 3:16:55 PM
Subject: Re: [AFMUG] Is it safe to turn on an 11ghz radio without an antenna?
An 800 yard 11 GHz link? Really? If ever there was a scenario that called for a 60 or 80 GHz radio system... Or if they absolutely insisted that a part 101 licensed link was necessary, 23 GHz and 1' antennas.



On Fri, Sep 23, 2016 at 12:08 PM, George Skorup <geo...@cbcast.com <mailto:geo...@cbcast.com>> wrote:

    Yep, I do that frequently. Just point them up at the ceiling. I
    usually leave the power where it's coordinated and rarely see it
    hotter than -40 or so.

    A local chemical company coordinated an 800 yard (really!?) 11GHz
    link. Their coordinated Rx was like -25dBm. Uh, OK. I forget what
    it was, maybe a PTP820.


    On 9/23/2016 10:57 AM, Faisal Imtiaz wrote:
    you should be fine..

    put them side by side next to or close to each other.
    don't point them at each other...
    and they come with power turned down 6db ......

    Just don't forget to set the power as per your coordination when
    you are mounting / before you are trying to align.

    :)

    Faisal Imtiaz
    Snappy Internet & Telecom
    7266 SW 48 Street
    Miami, FL 33155
    Tel: 305 663 5518 x 232

    Help-desk: (305)663-5518 Option 2 or Email:
    supp...@snappytelecom.net <mailto:supp...@snappytelecom.net>

    ------------------------------------------------------------------------

        *From: *"Mathew Howard" mailto:mhoward...@gmail.com
        *To: *"af" mailto:af@afmug.com
        *Sent: *Friday, September 23, 2016 11:27:11 AM
        *Subject: *[AFMUG] Is it safe to turn on an 11ghz radio
        without an antenna?

        Can I safely setup an 11ghz radio (Mimosa B11, in this case)
        on the bench without attaching it to the dish, or is there a
        risk it'll damage the radio?

        I seem to remember being told it was fine to turn on our
        SAFs without dishes, and I'm assuming these would be the
        same, but that was a long time ago...




Reply via email to