Yes, but most of the time it isn't worth it. You end up paying list on
most of the licensing, and they won't support the hardware if it fails.
They EOL the hardware every 5 years or so as well (it's still supported
for a while afterwards, but that's the typical cycle,) so you generally
want to be buying a newer chassis.
Sometimes it's worth buying a used one, especially if it's a bigger
chassis, but it generally doesn't make sense.
On 10/6/2016 11:44 AM, Adam Moffett wrote:
I lost track of whether the license transferal issue was with
Barracuda or Procera or both.
Could I buy a pre-chewed Procera and then just buy the support
contract/license for it?
------ Original Message ------
From: "Rory Conaway" <r...@triadwireless.net>
To: "af@afmug.com" <af@afmug.com>
Sent: 10/6/2016 12:42:19 PM
Subject: Re: [AFMUG] Procera costs
You can't buy a unit that was original purchased by one company, sell
it to another company and then they get a new license. Basically, if
I bought Gino's unit, I would have to pay him and he would pay
Barracuda.
Rory
-----Original Message-----
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Paul Stewart
Sent: Thursday, October 6, 2016 9:41 AM
To: af@afmug.com
Subject: Re: [AFMUG] Procera costs
Is that because you didn’t have a service contract with them? Just
curious … or is it that their license is non transferable same as
some other companies (ie. Cisco)
On Oct 6, 2016, at 12:19 PM, Rory Conaway <r...@triadwireless.net>
wrote:
And they won't let you transfer it to another company either.
Rory
-----Original Message-----
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Steve
Sent: Thursday, October 6, 2016 8:03 AM
To: af
Subject: Re: [AFMUG] Procera costs
No we tried to reactivate a license on a unit we decommissioned and
they charged us pretty much the full price as if it were brand new.
----- Original Message -----
From: "Rory Conaway" <r...@triadwireless.net>
To: "af" <af@afmug.com>
Sent: Thursday, October 6, 2016 11:00:27 AM
Subject: Re: [AFMUG] Procera costs
Unfortunately they won’t let me transfer license or we would be
talking.
Rory
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini
Sent: Thursday, October 6, 2016 7:53 AM
To: Animal Farm
Subject: Re: [AFMUG] Procera costs
I have a base unit for sale , offf list for more details...
On Thu, Oct 6, 2016 at 10:29 AM, Rory Conaway
<r...@triadwireless.net<mailto:r...@triadwireless.net>> wrote:
That's not bad. Barracuda costs more than that for a Gig.
Rory
-----Original Message-----
From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>]
On Behalf Of Steve
Sent: Thursday, October 6, 2016 7:24 AM
To: af
Subject: Re: [AFMUG] Procera costs
Arm, Leg and throw in some fingers.. Expect $15k minimum to start.
----- Original Message -----
From: "Adam Moffett" <dmmoff...@gmail.com<mailto:dmmoff...@gmail.com>>
To: "af" <af@afmug.com<mailto:af@afmug.com>>
Sent: Thursday, October 6, 2016 10:16:36 AM
Subject: [AFMUG] Procera costs
What's the lower end Procera appliance cost? Are there recurring
costs?
--
Simon Westlake
Skype: Simon_Sonar
Email: simon@sonar.software
Phone: (702) 447-1247
---------------------------
Sonar Software Inc
The next generation of ISP billing and OSS
https://sonar.software