Wink planner shows that it supposed to be a -65 signal Sent from my iPhone
> On Oct 17, 2016, at 18:20, Josh Luthman <j...@imaginenetworksllc.com> wrote: > > Plug into LinkPlanner > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > >> On Oct 17, 2016 7:11 PM, "Craig House" <cr...@totalhighspeed.net> wrote: >> Very close to the top of the water tower on the remote end. It bottom of >> the dish is resting on hr tank because the mount wasn't stable enough with >> all the wind here today 45mph. I'll raise it up and brace the mount >> tomorrow and see what happens. >> >> Sent from my iPhone >> >> > On Oct 17, 2016, at 18:03, David Kunat <m...@davidkunat.com> wrote: >> > >> > There are only two polarities on th af-x series. >> > >> > The first two are the receive signals at the local device. >> > >> > The second two (Rem chain0 and Rem chain 1) are the remote device receive >> > levels (at the far end of the link). >> > >> > Is there something in the way? Are you shooting close to the ground or >> > close to tree tops on one end? >> > >> > >> > > On Oct 17, 2016, at 2:39 PM, Craig House <cr...@totalhighspeed.net> >> > > wrote: >> > > >> > > So when you have one chain that shows almost 20 dbi weaker than the >> > > other 3 how do you tell which end to troubleshoot? I have already tried >> > > to point both ends better but they are 22 miles apart by air. 45 minutes >> > > by drive and I dont want to just keep driving and climbing if someone >> > > can tell me which end has the problem. >> > > >> > > Craig >> > > <link.PNG>