OK, so it is a card that slides into the 4 position metal box?
I’ll send you a new one to try.
From: Josh Luthman
Sent: Thursday, October 20, 2016 12:14 PM
To: af@afmug.com
Subject: Re: [AFMUG] ePMP Sync AP only doing 10 meg
Your metal box, indoors. Tied to the same ground as everything else coming in
to the building (A LOT).
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Oct 20, 2016 at 2:10 PM, <ch...@wbmfg.com> wrote:
I have a new rev of the GigE HV products. Is this plugged into an APC rack
or is it in an outdoor box?
The new design calms down goofiness like this on some circuits.
From: Josh Luthman
Sent: Thursday, October 20, 2016 12:08 PM
To: af@afmug.com
Subject: Re: [AFMUG] ePMP Sync AP only doing 10 meg
No. Mikrotiks don't do POE sync.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Thu, Oct 20, 2016 at 2:06 PM, <ch...@wbmfg.com> wrote:
Is it POE sync?
From: Josh Luthman
Sent: Thursday, October 20, 2016 12:00 PM
To: af@afmug.com
Subject: [AFMUG] ePMP Sync AP only doing 10 meg
I have an AP that we put up last year. It ran just fine until a few months
ago. About once a week I could simply reboot and it would go from 10 meg to
100. Now for the last day or two it's stuck at 10 meg. Plugging in to an
rb2011 and WB GIGE HV card. The weird thing is that the Mikrotik is showing
that the link partner is only advertising 10full or 10half. Does this mean it
has to be the line/SS card or can it be the radio itself?
Has anyone seen this kind of behavior before?
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
