That's another excellent argument for dry gel tape... On Fri, Oct 28, 2016 at 2:02 PM, Josh Luthman <j...@imaginenetworksllc.com> wrote:
> The issue was actually the gel in the cable, I think. Wiped it clean and > squeezed some out. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Oct 28, 2016 at 3:01 PM, George Skorup <geo...@cbcast.com> wrote: > >> 9 times out of 10 it's water in the cable. Hopefully you get to it before >> it ends up all the way to the bottom and into the SS. Been through this way >> too many times. Never without dry gel tape cable ever again. >> >> On 10/28/2016 1:43 PM, Josh Luthman wrote: >> >> Looks like the issue was the cable...of course... >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Thu, Oct 20, 2016 at 2:47 PM, Josh Luthman < >> j...@imaginenetworksllc.com> wrote: >> >>> All of mine are A.1 in the office. The truck is almost certainly older, >>> but I haven't looked at them with my own eyes. >>> >>> Can I just RMA a whole bunch of A.1 and get D.1? I'll buy the D.1 and >>> then you can do whatever you want with A.1, I just want to avoid any >>> ethernet link issues. >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Thu, Oct 20, 2016 at 2:37 PM, <ch...@wbmfg.com> wrote: >>> >>>> Yes, you want rev C or D. >>>> >>>> Nothing wrong with A & B but something odd is happening with ePMP and >>>> POE sync. We know what the POE sync issues is and have solved that. But >>>> ePMP still has some goofiness that we have not figured out but the fix for >>>> POE sync seems to also cure the ePMP problem. >>>> >>>> *From:* Josh Luthman >>>> *Sent:* Thursday, October 20, 2016 12:33 PM >>>> *To:* af@afmug.com >>>> *Subject:* Re: [AFMUG] ePMP Sync AP only doing 10 meg >>>> >>>> Definitely not. These spares are absolutely more than 4 weeks. Do >>>> they have the rev written on them? >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Thu, Oct 20, 2016 at 2:30 PM, <ch...@wbmfg.com> wrote: >>>> >>>>> Are these ones that I have sent you very recently? (Like in the last 4 >>>>> weeks). If not then they don’t have the new rev. >>>>> >>>>> *From:* Josh Luthman >>>>> *Sent:* Thursday, October 20, 2016 12:28 PM >>>>> *To:* af@afmug.com >>>>> *Subject:* Re: [AFMUG] ePMP Sync AP only doing 10 meg >>>>> >>>>> That's the box, yes. >>>>> >>>>> I've got new GIGEHV cards to try, just sent a guy out there to swap >>>>> that out and see what happens. Next step would be the line/radio but it's >>>>> raining for days at this point... >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> On Thu, Oct 20, 2016 at 2:16 PM, <ch...@wbmfg.com> wrote: >>>>> >>>>>> OK, so it is a card that slides into the 4 position metal box? >>>>>> I’ll send you a new one to try. >>>>>> >>>>>> *From:* Josh Luthman >>>>>> *Sent:* Thursday, October 20, 2016 12:14 PM >>>>>> *To:* af@afmug.com >>>>>> *Subject:* Re: [AFMUG] ePMP Sync AP only doing 10 meg >>>>>> >>>>>> Your metal box, indoors. Tied to the same ground as everything else >>>>>> coming in to the building (A LOT). >>>>>> >>>>>> >>>>>> Josh Luthman >>>>>> Office: 937-552-2340 >>>>>> Direct: 937-552-2343 >>>>>> 1100 Wayne St >>>>>> Suite 1337 >>>>>> Troy, OH 45373 >>>>>> >>>>>> On Thu, Oct 20, 2016 at 2:10 PM, <ch...@wbmfg.com> wrote: >>>>>> >>>>>>> I have a new rev of the GigE HV products. Is this plugged into an >>>>>>> APC rack or is it in an outdoor box? >>>>>>> The new design calms down goofiness like this on some circuits. >>>>>>> >>>>>>> *From:* Josh Luthman >>>>>>> *Sent:* Thursday, October 20, 2016 12:08 PM >>>>>>> *To:* af@afmug.com >>>>>>> *Subject:* Re: [AFMUG] ePMP Sync AP only doing 10 meg >>>>>>> >>>>>>> No. Mikrotiks don't do POE sync. >>>>>>> >>>>>>> >>>>>>> Josh Luthman >>>>>>> Office: 937-552-2340 >>>>>>> Direct: 937-552-2343 >>>>>>> 1100 Wayne St >>>>>>> Suite 1337 >>>>>>> Troy, OH 45373 >>>>>>> >>>>>>> On Thu, Oct 20, 2016 at 2:06 PM, <ch...@wbmfg.com> wrote: >>>>>>> >>>>>>>> Is it POE sync? >>>>>>>> >>>>>>>> *From:* Josh Luthman >>>>>>>> *Sent:* Thursday, October 20, 2016 12:00 PM >>>>>>>> *To:* af@afmug.com >>>>>>>> *Subject:* [AFMUG] ePMP Sync AP only doing 10 meg >>>>>>>> >>>>>>>> I have an AP that we put up last year. It ran just fine until a >>>>>>>> few months ago. About once a week I could simply reboot and it would >>>>>>>> go >>>>>>>> from 10 meg to 100. Now for the last day or two it's stuck at 10 meg. >>>>>>>> Plugging in to an rb2011 and WB GIGE HV card. The weird thing is that >>>>>>>> the >>>>>>>> Mikrotik is showing that the link partner is only advertising 10full or >>>>>>>> 10half. Does this mean it has to be the line/SS card or can it be the >>>>>>>> radio itself? >>>>>>>> >>>>>>>> Has anyone seen this kind of behavior before? >>>>>>>> >>>>>>>> Josh Luthman >>>>>>>> Office: 937-552-2340 >>>>>>>> Direct: 937-552-2343 >>>>>>>> 1100 Wayne St >>>>>>>> Suite 1337 >>>>>>>> Troy, OH 45373 >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> >