What kind of rate packages do you sell with this kind of loading?
What happens during netflix hour.
From: Josh Baird
Sent: Thursday, January 05, 2017 12:08 PM
To: af@afmug.com
Subject: Re: [AFMUG] epmp vs 450 comparison
We have ePMP AP's with 55 subs that are doing just fine. Probably won't load
any more on it due to high downlink utilization during peak usage.
On Thu, Jan 5, 2017 at 2:00 PM, Adam Moffett <dmmoff...@gmail.com> wrote:
Over 20-30 subs not recommended by whom?
When I talked to Cambium about subscriber density, they said they've tested
with up to 120, but suggested keeping it under 65. I do have an ePMP AP with
43 SM's at this point, no trouble that I'm aware of. It hits abou 60% air
utilization at peak times.
------ Original Message ------
From: "Trey Scarborough" <t...@3dsc.co>
To: af@afmug.com
Sent: 1/5/2017 9:21:24 AM
Subject: Re: [AFMUG] epmp vs 450 comparison
Your biggest difference is your throughput per MHZ your epmp will do less
bandwidth in a 20mhz channel than a 450. he other big difference is subscriber
density. It is not recommended to go over 20-30 subs per AP on epmp without
loss of performance. I regularly see 450 APs with 70+ subs per AP. With Medusa
I have seen over 130. As far as the Medusa not being field proven you may not
have field tested it yet, but I know for a fact it has been tested and running
on networks for some time now and a viable solution.
If you have any more questions feel free to hit me up off list.
On 1/5/2017 7:36 AM, David Milholen wrote:
The radios on these 2 are entirely different. One is using std based
radio and the other completely proprietary.
Since framing will be slightly different and so will processing delay.
The stds based radio gets close to mimicking the
450 series but thats strictly based on Cambium magic. Capacity and
sustained rates per VC is the where you will see a difference.
Latency will be very consistent from ap to sub. PMP450i is where its at.
On 1/4/2017 2:55 PM, That One Guy /sarcasm wrote:
if im running 75/25, epmp is roughly 87mb capacity, 450 93mb capacity
is this correct?
are efficiencies batter on 450 if installation is the same? ie, if I
forlifted one AP with 17 epmps to 450, where would my gains be
assuming everything stays installed in the same spot. Its not like the
FCC gives 450 any more power than epmp, so path loss should be the same.
Im looking at this epmp 1000 sector thats running overall about 64-7%
efficient with 17 subscribers and wondering what the gain is to move
to 450 (exclude medusa, as its not field proven)
--
If you only see yourself as part of the team but you don't see your
team as part of yourself you have already failed as part of the team.
--
