Yup, I've replaced a few 2011's wuth 3011's, and since the enclosures at those sites were too small for the rackmount case, I just put them into the 2011 cases and they fit perfectly.
On Jan 8, 2017 8:22 PM, "Ken Hohhof" <af...@kwisp.com> wrote: > I assume he is scavenging the case from a 2011 and slipping the 3011 into > it. I’ve wondered if that would work, I guess the answer is yes. Since > I’m replacing 2011’s with 3011’s, that would be a viable approach. > > > > Is it that simple, or does it involve some mods? > > > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Baird > *Sent:* Sunday, January 8, 2017 8:05 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] RB3011 > > > > If you can't fit the rackmount form-factor in your enclosure, it seems > pretty logical to me. > > > > On Sun, Jan 8, 2017 at 8:50 PM, Josh Reynolds <j...@kyneticwifi.com> > wrote: > > ... but why :) > > On Sun, Jan 8, 2017 at 7:40 PM, Mathew Howard <mhoward...@gmail.com> > wrote: > > To fit in boxes that are too small for the rackmount case. > > > > On Jan 8, 2017 7:17 PM, "Josh Reynolds" <j...@kyneticwifi.com> wrote: > >> > > >> Why are you replacing their cases? > >> > >> On Jan 8, 2017 7:15 PM, "Mathew Howard" <mhoward...@gmail.com> wrote: > >>> > >>> We have a few running. No problems with current firmware... My only > >>> complaint is that they don't sell one in a desktop case, and I'm > running out > >>> of 2011's to gut... > >>> > >>> On Jan 8, 2017 7:04 PM, "Ken Hohhof" <af...@kwisp.com> wrote: > >>>> > >>>> Works as advertised, once I upgraded firmware. It was really hosed > with > >>>> the shipping firmware but they’ve probably fixed that by now. > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jason McKemie > >>>> Sent: Sunday, January 8, 2017 6:57 PM > >>>> To: af@afmug.com > >>>> Subject: [AFMUG] RB3011 > >>>> > >>>> > >>>> > >>>> Anyone using these? Good, bad, ugly? > >>>> > >>>> > >>>> > >>>> Also, I'm looking to power one from a 48v Eltek setup, any > >>>> recommendations on a DC/DC converter? > > >