I have had Cisco products not negotiate to the highest possible connection before. So I always locked one end down.
From: Ken Hohhof Sent: Monday, February 06, 2017 7:52 AM To: [email protected] Subject: Re: [AFMUG] Cisco Nexus Switch / Mikrotik CCR Why do some people always say “turn off auto speed and duplex” when they see Cisco? This goes against my experience and training. All my Cisco routers and switches are set for auto. The world has not ended AFAIK. Is this something unique to the Nexus product line? From: Af [mailto:[email protected]] On Behalf Of Carlos Alcantar Sent: Monday, February 6, 2017 2:01 AM To: [email protected] Subject: Re: [AFMUG] Cisco Nexus Switch / Mikrotik CCR make sure you turn off any auto duplex and speed settings and hard set both sides. make sure your also checking all your stp settings those could be fun and shutting down ports if you have any type of vlan mismatches ect happening. Carlos Alcantar Race Communications / Race Team Member 1325 Howard Ave. #604, Burlingame, CA. 94010 Phone: +1 415 376 3314 / [email protected] / http://www.race.com -------------------------------------------------------------------------------- From: Af <[email protected]> on behalf of Jason McKemie <[email protected]> Sent: Sunday, February 5, 2017 11:11:48 PM To: [email protected] Subject: [AFMUG] Cisco Nexus Switch / Mikrotik CCR Has anyone had any success with linking these two via fiber? We were unable to get the link to work, so I ended up using a Cisco router as an intermediary. I'd like to get rid of that extra hardware if possible. -Jason
