Interesting. Just talked to SIAE yesterday and they won't have radios available for a while. I believe we have 2 ideas on the table though, to address this.
Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Gino Villarini Sent: Wednesday, March 22, 2017 1:02 AM To: af@afmug.com Subject: Re: [AFMUG] Best switch for bonding dual 10Gbps radio links Seems like you might need some Cisco and SIAE gear? http://www.cisco.com/c/en/us/solutions/collateral/service-provider/unified-ran-backhaul/white_paper_c11-728355.html From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>> Reply-To: "af@afmug.com<mailto:af@afmug.com>" <af@afmug.com<mailto:af@afmug.com>> Date: Tuesday, March 21, 2017 at 12:20 PM To: "af@afmug.com<mailto:af@afmug.com>" <af@afmug.com<mailto:af@afmug.com>> Subject: Re: [AFMUG] Best switch for bonding dual 10Gbps radio links Can be routed or switched. The end result simply needs to be 40Gbps with lower speeds optional in harsh weather with minimal latency. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Josh Reynolds Sent: Tuesday, March 21, 2017 7:57 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] Best switch for bonding dual 10Gbps radio links That was an Accedian product. So you need 40Gbps... at a minimum of 8x10Gbps at each end. I think MikroTik has an 8 port 10Gbps CCR, but I don't have any experience with it. Can the hop be routed, or must it be switched? Gino Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [cid:image001.png@01D2A2D9.BB3A9FB0] On Mar 21, 2017 9:50 AM, "Rory Conaway" <r...@triadwireless.net<mailto:r...@triadwireless.net>> wrote: Josh, what was that product that you used to rep? I actually need 40Gbps across 1 hop with four 10Gbps radios. Just need to figure out the best way to do it. Kevin Myers just posted this on Facebook. http://www.stubarea51.net/2016/10/27/wisp-design-using-ospf-to-build-a-transit-fabric-over-unequal-links/ Rory From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of Josh Reynolds Sent: Tuesday, March 21, 2017 7:48 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] Best switch for bonding dual 10Gbps radio links Right. If you need a 10G+ stream, you'll need in-radio bonding. If you just need 10+ Gbps of traffic, there are multiple ways to do that. On Mar 21, 2017 9:38 AM, "Rory Conaway" <r...@triadwireless.net<mailto:r...@triadwireless.net>> wrote: Apparently this problem is more difficult than I imagined. Some radio vendors do this but apparently not all. Rory From: Af [mailto:af-boun...@afmug.com<mailto:af-boun...@afmug.com>] On Behalf Of Josh Reynolds Sent: Tuesday, March 21, 2017 6:23 AM To: af@afmug.com<mailto:af@afmug.com> Subject: Re: [AFMUG] Best switch for bonding dual 10Gbps radio links He can't deploy a product that's not released, homie. Even then, it's still brand new. Always best to let others air out the bugs unless you did some of the testing yourself and know what to expect ;) On Mar 21, 2017 8:19 AM, "Mike Hammett" <af...@ics-il.net<mailto:af...@ics-il.net>> wrote: Your not watching of my videos has failed you. ----- Mike Hammett Intelligent Computing Solutions<http://www.ics-il.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/ICSIL>[http://www.ics-il.com/images/googleicon.png]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/intelligent-computing-solutions>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/ICSIL> Midwest Internet Exchange<http://www.midwest-ix.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/mdwestix>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/midwest-internet-exchange>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/mdwestix> The Brothers WISP<http://www.thebrotherswisp.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/thebrotherswisp>[http://www.ics-il.com/images/youtubeicon.png] <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> ________________________________ From: "Josh Reynolds" <j...@kyneticwifi.com<mailto:j...@kyneticwifi.com>> To: af@afmug.com<mailto:af@afmug.com> Sent: Tuesday, March 21, 2017 8:15:39 AM Subject: Re: [AFMUG] Best switch for bonding dual 10Gbps radio links It's not listed on their website I don't believe. Neither of the currently listed options mention trill in the data sheet. On Mar 21, 2017 6:41 AM, "Mike Hammett" <af...@ics-il.net<mailto:af...@ics-il.net>> wrote: I'd look at IgniteNet's new TRILL switch. ----- Mike Hammett Intelligent Computing Solutions<http://www.ics-il.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/ICSIL>[http://www.ics-il.com/images/googleicon.png]<https://plus.google.com/+IntelligentComputingSolutionsDeKalb>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/intelligent-computing-solutions>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/ICSIL> Midwest Internet Exchange<http://www.midwest-ix.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/mdwestix>[http://www.ics-il.com/images/linkedinicon.png]<https://www.linkedin.com/company/midwest-internet-exchange>[http://www.ics-il.com/images/twittericon.png]<https://twitter.com/mdwestix> The Brothers WISP<http://www.thebrotherswisp.com/> [http://www.ics-il.com/images/fbicon.png]<https://www.facebook.com/thebrotherswisp>[http://www.ics-il.com/images/youtubeicon.png] <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> ________________________________ From: "Rory Conaway" <r...@triadwireless.net<mailto:r...@triadwireless.net>> To: af@afmug.com<mailto:af@afmug.com> Sent: Monday, March 20, 2017 11:30:07 PM Subject: [AFMUG] Best switch for bonding dual 10Gbps radio links Lots of options today and redundancy with the switches wouldn't be a bad thing either. Rory Conaway * Triad Wireless * CEO 4226 S. 37th Street * Phoenix * AZ 85040 602-426-0542<tel:(602)%20426-0542> r...@triadwireless.net<mailto:r...@triadwireless.net> www.triadwireless.net<http://www.triadwireless.net/> "An optimist will tell you the glass is half-full; the pessimist, half-empty; and the engineer will tell you the glass is twice the size it needs to be"
