Gino, I think I have finally figured out the trick to turning a Andrew/Commscope antenna into the correct direct mount for most of the radios out there. What exactly are you trying to mount to what?
Haven’t figured out the same for RadioWaves. I have been having good luck turning antennas made for DragonWave or PTP800 into Ceragon or Cambium 820’s, or the other way. Finding the correct part numbers is the hardest part. Mark > On Apr 1, 2017, at 12:41 PM, Gino Villarini <g...@aeronetpr.com> wrote: > > Coax or ubr > > From: Af <af-boun...@afmug.com <mailto:af-boun...@afmug.com>> on behalf of > Chuck McCown <ch...@wbmfg.com <mailto:ch...@wbmfg.com>> > Reply-To: "af@afmug.com <mailto:af@afmug.com>" <af@afmug.com > <mailto:af@afmug.com>> > Date: Saturday, April 1, 2017 at 12:09 PM > To: "af@afmug.com <mailto:af@afmug.com>" <af@afmug.com <mailto:af@afmug.com>> > Subject: Re: [AFMUG] Looking for a waveguide adapter for Remec 11ghz > > > > Gino Villarini > > President > Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 > <aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png> > > I have a design and some prototypes. You looking for coax adapters? > > From: Gino Villarini <> > Sent: Saturday, April 01, 2017 10:06 AM > To: af@afmug.com <> > Subject: [AFMUG] Looking for a waveguide adapter for Remec 11ghz > > Got some remec interface antenna, any remec to waveguide adapters in the > market? > > > Gino Villarini > > President > Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 > >